Lamination Adhesive

SECTION 2: Hazards identification

1 Flammability 0 Reactivity 0 Other 0 Flash Point Aqueous System Method Not Determined Lower Explosion Limit Not Determined Minimum Ignition Temp Not Determined Extinguishing Media Aqueous product, for fires involving dried material, use water, carbon dioxide, dry chemicals or foam. Unusual Fire and Explosion None Thermal Decomposition Carbon monoxide, Carbon Dioxide Fire Fighting Guidance If product is present in fire and threat of decomposition exists, wear self contained breathing apparatus with full face piece. 5. SPILL OR LEAK PROCEDURES Build Dike to contain flow. Soak up with sawdust, sand oil dry or other absorbent material. Use appropriate personal equipment during cleanup, treatment, storage, transportation, and disposal must be in accordance with Federal, State, Local Regulations. Soak up with absorbent material and place material in paper carton. Landfill according to regulations. 6. SPECIAL PROTECTION INFORMATION Emergencey Overview: White colored water-based adhesive. Slippery in the wet state. Ventilation: Use with adequate ventilation. For normal use, ordinary air movement is sufficient. Ingestion: No hazard expected in normal industrial use. Ingestion is not a likely route of exposure. Respiratory: This product can produce a mild respiratory tract irritation in confined areas under EXTREME conditions. Protective Gloves: Protective gloves should be worn when repeated or long contact with skin is exposed. Eye Protection: Wear Safety Glasses or other eye/face protection. Substance may cause moderate eye irritation. 7. PHYSICAL DATA Physical State Liquid Vapor Pressure Same as Water Color Milky white Vapor Density Same as Water Odor Slight Vinegar Water Solubility Miscible Boiling Point 100 C. Bulk Density Not Determined Freezing Point Not Determined Specific Gravity 1.1 Melting Point Not Determined Evaporation Rate Same as Water PH 4-7 Hazardous Polymerization Will not occur Stability Stable Conditions to Avoid None Known 8. STABILITY AND REACTIVITY Stability: This product is stable Hazardous Polymerization: Hazardous polymerization will not occur CONDITIONS TO AVOID: none known INCOMPATIBILITY: Strong acids and bases. HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon may be released during combustion. 9. TOXICOLOGICAL, ECOLOGICAL, DISPOSAL Acute and chronical health effects are not expected as long as good industrial hygiene and safety percautions are followed. This product has not been tested for environmental effects. WASTE DISPOSAL: Disposal of this product must comply with all applicable federal, state and local regulations.