RESIBAHR HONDURAS GUM ROSIN

SECTION 2: Hazards identification

CLASSIFICATION OF THE SUBSTANCE Combustibles dust may form combustible dust concentrations in the air DANGER: HOT MOLTEN PRODUCT Burns may cause irreversible eye injury and blindness. Causes skin burns. Inhalation of smoke or fumes may cause throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals

Potential health effects

May cause eye irritation by mechanical abrasion. May cause skin irritation by mechanical abrasion. Inhalation may cause respiratory tract irritation. Prolonged exposure to smoke or fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals. GENERAL HYGIENIC PRACTICES Avoid contact with eyes, skin, and clothing. Avoid breathing dust or fumes. Handle in areas with adequate ventilation. WARNING Solid product at ambient temperature. Static charges generated by emptying package in or near flammable vapors may cause a flash fire. May form flammable dust-air mixtures. Refer to SDS Section 8, Personal Protection and Exposure Controls, for further information. Refer to Section 5 for Hazardous Combustion Products, and Section 10 for Hazardous Decomposition/Hazardous Polymerization Products.

2.2 Label elements

The substance is classified and labeled accordingly to the Globally Harmonized System (GHS).

Hazard pictograms

Void

Signal word

Warning

Hazard statements

May form combustible dust concentrations in air. Tegucigalpa, M.D.C. Honduras C.A., P.O. Box 143 A VAN E-mail irb@resibahr.com P BOK Tel. (504) 2280-8447 / 2236-5505

Precautionary statements

(TAKEN FROM CPR) P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat/sparks/open flames/ hot surfaces. -No smoking. P234: Keep only in original container. P243: Take precautionary measures against static discharge. P261: Avoid breathing dust/fume/gas/mist/vapors/ spray. P262: Do not get in eyes, on skin, or on clothing. P264: Wash thoroughly after handling. P270: Do not eat, drink or smoke when using product. P280: Wear protective gloves/eye protection. P284: In case of inadequate ventilation wear respiratory protection. P301+P312 If swallowed Call a doctor if you do not feel well P301+P330+P331 If swallowed Rinse mouth. Do NOT induce vomiting P302+P352 If on the skin Wash with plenty of soap and water P304+P312 IF INHALED Call a doctor if you feel unwell P304+P341 If inhaled If breathing is difficult, remove person to fresh air and comfortable far breathing. P305+P351+P338 If in eyes Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P314: Get medical advice/attention if you feel unwell. P333+313 If skin irritation or rash occurs Get Medical advice/attention P363: Wash contaminated clothing before reuse. P402+P404: Store in a dry place. Store in closed container. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool P501: Dispose of contents/ container in accordance with local/regional/national/international regulations.

2.1 Classification of the substance or mixture

Combustibles dust may form combustible dust concentrations in the air. DANGER: HOT MOLTEN PRODUCT: Burns may cause irreversible eye injury and blindness. Causes skin burns. Inhalation of smoke or fumes may cause throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals. POTENTIAL HEALTH EFFECTS: May cause eye irritation by mechanical abrasion. May cause skin irritation by mechanical abrasion. Inhalation may cause respiratory tract irritation. Prolonged exposure to smoke or fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals. GENERAL HYGIENIC PRACTICES: Avoid contact with eyes, skin, and clothing. Avoid breathing dust or fumes. Handle in areas with adequate ventilation. WARNING: Solid product at ambient temperature. Static charges generated by emptying package in or near flammable vapors may cause a flash fire. May form flammable dust-air mixtures. Refer to SDS Section 8, Personal Protection and Exposure Controls, for further information. Refer to Section 5 for Hazardous Combustion Products, and Section 10 for Hazardous Decomposition/Hazardous Polymerization Products.