3M Scotch-Weld Epoxy Potting Compound/Adhesive DP270 Clear, Part B

Hazard statements (CLP)

H315, H317, H319, H360F, H411

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

No 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS07 (Exclamation mark) |GHS08 (Health Hazard) |GHS09 (Environment) | Ingredient CAS Nbr EC No. % by Wt bis-[4-(2,3-epoxipropoxi)phenyl]propane 1675-54-3 216-823-5 90 - 98 Hydrocarbon resin 9003-53-6 500-008-9 1 - 10

Hazard statements

H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H360F May damage fertility. H411 Toxic to aquatic life with long lasting effects.

Prevention

P201 Obtain special instructions before use. P273 Avoid release to the environment. P280E Wear protective gloves. P201 Obtain special instructions before use. P280E Wear protective gloves.

Response

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H317 May cause an allergic skin reaction. H360F May damage fertility. <=125 ml Precautionary statements P308 + P313 IF exposed or concerned: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.

Additional information

Supplemental Precautionary Statements: Restricted to professional users. 10% of the mixture consists of components of unknown acute oral toxicity.

Contains

10% of components with unknown hazards to the aquatic environment

2.3 Other hazards

None known. This material does not contain any substances that are assessed to be a PBT or vPvB

2.1 Classification of the substance or mixture

The retained CLP Regulation (EU) No 1272/2008 as amended for Great Britain The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. CLASSIFICATION: Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Serious Eye Damage/Eye Irritation, Category 2 - Eye Irrit. 2; H319 Skin Sensitization, Category 1 - Skin Sens. 1; H317 Reproductive Toxicity, Category 1B - Repr. 1B; H360F Hazardous to the Aquatic Environment (Chronic), Category 2 - Aquatic Chronic 2; H411 For full text of H phrases, see Section 16. 2.2. Label elements The retained CLP Regulation (EU) No 1272/2008 as amended for Great Britain SIGNAL WORD DANGER. Symbols GHS07 (Exclamation mark) |GHS08 (Health Hazard) |GHS09 (Environment) | Pictograms Ingredient CAS Nbr EC No. % by Wt bis-[4-(2,3-epoxipropoxi)phenyl]propane 1675-54-3 216-823-5 90 - 98 Hydrocarbon resin 9003-53-6 500-008-9 1 - 10 HAZARD STATEMENTS: H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H360F May damage fertility. H411 Toxic to aquatic life with long lasting effects. PRECAUTIONARY STATEMENTS Prevention: P201 Obtain special instructions before use. P273 Avoid release to the environment. P280E Wear protective gloves. Response: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H317 May cause an allergic skin reaction. H360F May damage fertility. <=125 ml Precautionary statements Prevention: P201 Obtain special instructions before use. P280E Wear protective gloves. Response: P308 + P313 IF exposed or concerned: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. SUPPLEMENTAL INFORMATION: Supplemental Precautionary Statements: Restricted to professional users. 10% of the mixture consists of components of unknown acute oral toxicity. Contains 10% of components with unknown hazards to the aquatic environment. 2.3. Other hazards None known. This material does not contain any substances that are assessed to be a PBT or vPvB SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Ingredient Identifier(s) % Classification according to Regulation (EC) No. 1272/2008 [CLP], as amended for GB bis-[4-(2,3-epoxipropoxi)phenyl]propane (CAS-No.) 1675-54-3 90 - 98 Skin Irrit. 2, H315 (EC-No.) 216-823-5 Eye Irrit. 2, H319 Skin Sens. 1, H317 Aquatic Chronic 2, H411 Hydrocarbon resin (CAS-No.) 9003-53-6 1 - 10 Repr. 1B, H360F (EC-No.) 500-008-9 Please see section 16 for the full text of any H statements referred to in this section Specific Concentration Limits Ingredient Identifier(s) Specific Concentration Limits bis-[4-(2,3-epoxipropoxi)phenyl]propane (CAS-No.) 1675-54-3 (C >= 5%) Skin Irrit. 2, H315 (EC-No.) 216-823-5 (C >= 5%) Eye Irrit. 2, H319 For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Remove person to fresh air. If you feel unwell, get medical attention. Skin contact Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye contact Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed The most important symptoms and effects based on the GB CLP classification include: Irritation to the skin (localized redness, swelling, itching, and dryness). Allergic skin reaction (redness, swelling, blistering, and itching). Serious irritation to the eyes (significant redness, swelling, pain, tearing, and impaired vision). 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Aldehydes. During combustion. Hydrocarbons. During combustion. Carbon monoxide During combustion. Carbon dioxide. During combustion. Hydrogen Chloride During combustion. Ketones. During combustion. Toxic vapour, gas, particulate. During combustion. 5.3. Advice for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent