3M Scotch-Weld EC-3532 B

3M United Kingdom PLC

Revision date : 2026-06-12

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

25322-69-4

Name of the chemical

polypropyleneglycol

Concentration

40-70

EC/CAS

238-877-9/14807-96-6

Name of the chemical

Talc

Concentration

20-30

EC/CAS

205-743-6/149-57-5

Name of the chemical

2-ethylhexanoic acid

Concentration

0.1-<1

EC/CAS

234-186-1/10584-98-2

Name of the chemical

Dibutyltinbis(2-ethylhexyl mercaptoacetate)

Concentration

0.1 - < 0.3

Listed in

General Information

Version

4.00

Revision date

2026-06-12

Product name

3M Scotch-Weld EC-3532 B

1.2.1 Relevant identified uses

Structural adhesive

Emergency telephone

+44 (0)1344 858 000

Icons in SDS

M009 M010 M011 M017

Company Information

company name

3M United Kingdom PLC

e-mail address of the competent person responsible for the Safety Data Sheet

ner-productstewardship@mmm.com

Section 2

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Supplemental label elements

EUH210 Safety data sheet available on request. EUH208

Contains

2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. | 2-Ethylhexyl 4,4-dibutyl- 10-ethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate. May produce an allergic reaction.

2.3 Other hazards

None known. This material does not contain any substances that are assessed to be a PBT or vPvB

2.1 Classification of the substance or mixture

The retained CLP Regulation (EU) No 1272/2008 as amended for Great Britain CLASSIFICATION: This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended for Great Britain, on classification, labelling, and packaging of substances and mixtures. 2.2. Label elements The retained CLP Regulation (EU) No 1272/2008 as amended for Great Britain Not applicable SUPPLEMENTAL INFORMATION: Supplemental Hazard Statements: EUH210 Safety data sheet available on request. EUH208 Contains 2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. | 2-Ethylhexyl 4,4-dibutyl- 10-ethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate. May produce an allergic reaction. 2.3. Other hazards None known. This material does not contain any substances that are assessed to be a PBT or vPvB SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Ingredient Identifier(s) % Classification according to Regulation (EC) No. 1272/2008 [CLP], as amended for GB Polyester resin Trade Secret 40 - 70 Substance not classified as hazardous Propane-1,2-diol, propoxylated (CAS-No.) 25322-69-4 20 - 30 Acute Tox. 4, H302 Talc (CAS-No.) 14807-96-6 10 - 30 Substance with a national occupational (EC-No.) 238-877-9 exposure limit Polyoxypropylene triol (CAS-No.) 25723-16-4 1 - 10 Substance not classified as hazardous (EC-No.) 500-041-9 Amorphous silica (CAS-No.) 1318-02-1 1 - 5 Substance with a national occupational (EC-No.) 215-283-8 exposure limit 2-(3,4- (CAS-No.) 3388-04-3 0.1 - < 1 Aquatic Chronic 3, H412 Epoxycyclohexyl)ethyltrimethoxysilane (EC-No.) 222-217-1 Skin Sens. 1, H317 2-ethylhexanoic acid (CAS-No.) 149-57-5 0.1 - < 0.3 Repr. 1B, H360D (EC-No.) 205-743-6 Dibutyltin bis(2-ethylhexyl (CAS-No.) 10584-98-2 0.1 - < 0.3 Acute Tox. 3, H331 mercaptoacetate) (EC-No.) 234-186-1 Acute Tox. 3, H311 Acute Tox. 4, H302 Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1B, H317 Muta. 2, H341 Repr. 1B, H360FD STOT SE 1, H370 STOT RE 1, H372 Aquatic Acute 1, H400,M=10 Aquatic Chronic 1, H410,M=1 Please see section 16 for the full text of any H statements referred to in this section For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Remove person to fresh air. If you feel unwell, get medical attention. Skin contact Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye contact Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During combustion. Carbon dioxide. During combustion. Oxides of nitrogen. During combustion. Toxic vapour, gas, particulate. During combustion. 5.3. Advice for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Use personal protective equipment based on the results of an exposure assessment. Refer to Section 8 for PPE recommendations. If anticipated exposure resulting from an accidental release exceeds the protective capabilities of the PPE listed in Section 8, or are unknown, select PPE that offers an appropriate level of protection. Consider the physical and chemical hazards of the material when doing so.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.