3M Cable Preparation Kit CC-3 (Bag)

Hazard statements (CLP)

H315, H317

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

Classification of the substance or mixture Skin Corrosion/Irritation: Category 2 Skin Sensitizer: Category 1

Signal word

Warning

Hazard pictograms

Exclamation mark |

Hazard statements

H315 Causes skin irritation. H317 May cause an allergic skin reaction.

Prevention

P280E Wear protective gloves.

Response

P333 + P313 If skin irritation or rash occurs: Get medical attention.

2.3 Other hazards

The aspiration hazard classification is not required due to the product's physical form.

2.1 Classification of the substance or mixture

Skin Corrosion/Irritation: Category 2. Skin Sensitizer: Category 1. 2.2. Label elements Signal word Warning Symbols Exclamation mark | Pictograms Hazard statements H315 Causes skin irritation. H317 May cause an allergic skin reaction. Precautionary statements Prevention: P280E Wear protective gloves. Response: P333 + P313 If skin irritation or rash occurs: Get medical attention. 2.3. Other hazards The aspiration hazard classification is not required due to the product's physical form. SECTION 3: Composition/information on ingredients This material is a mixture. Ingredient C.A.S. No. % by Wt HYDROTREATED HEAVY NAPHTHA 64742-48-9 50 - 70 (PETROLEUM) Cotton Pads None 25 - 40 D-LIMONENE 5989-27-5 5 - 20 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: If exposed, flush eyes with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms develop, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Allergic skin reaction (redness, swelling, blistering, and itching). 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. 5.3. Special protective actions for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Use personal protective equipment based on the results of an exposure assessment. Refer to Section 8 for PPE recommendations. If anticipated exposure resulting from an accidental release exceeds the protective capabilities of the PPE listed in Section 8, or are unknown, select PPE that offers an appropriate level of protection. Consider the physical and chemical hazards of the material when doing so. Examples of PPE ensembles for emergency response could include wearing bunker gear for a release of flammable material; wearing chemical protective clothing if the spilled material is a corrosive, a sensitizer, a significant dermal irritant, or can be absorbed through the skin; or donning a positive pressure supplied-air respirator for chemicals with inhalation hazards. For information regarding physical and health hazards, refer to sections 2 and 11 of the SDS. Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non- sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode.