3M Polyether Adhesive

Hazard statements (CLP)

H225, H336

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

Notice 2017 Classified as hazardous in accordance with the relevant criteria of the HSNO Act 1996, the Hazardous Substances

2.1 Classification of the substance or mixture

Notice 2017 and Hazardous Substances (Minimum Degrees of Hazard) Notice 2017 Refer to Section 14 of this Safety Data Sheet for product Dangerous Goods Classification. GHS HSNO Flammable Liquid: Category 2 3.1B Flammable Liquid Specific Target Organ Toxicity (single exposure): 6.9B Narcotic effects Category 3

Hazard pictograms

Flame | Exclamation mark |

Hazard statements

H225 Highly flammable liquid and vapour. H336 May cause drowsiness or dizziness.

Prevention

P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P240B Ground and bond container and receiving equipment. P242A Use non-sparking tools. P233 Keep container tightly closed. P243A Take action to prevent static discharges. P241 Use explosion-proof electrical/ventilating/lighting equipment. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280B Wear protective gloves and eye/face protection.

Response

P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON CENTRE or doctor/physician if you feel unwell. P370 + P378G In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Storage

P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P403 + P235 Store in a well-ventilated place. Keep cool. P405 Store locked up.

Disposal

P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations.