Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
30 - 60
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
7 - 13
EC/CAS
822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
< 0.2
EC/CAS
71-43-2
Name of the chemical
Benzol
Concentration
< 0.1
General Information
Revision date
2015-02-09
Product name
Mar-Hyde 4.4 Ultimate 2K Urethane Primer Catalyst, PN 5555, 5556, 5557
supplier name
3M
Manufacturer Name
3M
Emergency telephone
1-800-364-3577, (651) 737-6501
Icons in SDS
Company Information
company name
3M
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) The label elements below were prepared in accordance with
2.1 Classification of the substance or mixture
Flammable Liquid: Category 2. Acute Toxicity (inhalation): Category 4. Serious Eye Damage/Irritation: Category 2B. Skin Corrosion/Irritation: Category 2. Respiratory Sensitizer: Category 1A. Skin Sensitizer: Category 1A.
Aspiration hazard
Category 1 Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (single exposure): Category 2. Specific Target Organ Toxicity (central nervous system): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1.
Hazard pictograms
Flame | Exclamation mark | Health Hazard |
Hazard statements
Highly flammable liquid and vapor. Causes eye irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Harmful if inhaled. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. May damage fertility or the unborn child. May cause damage to organs: respiratory system | Causes damage to organs through prolonged or repeated exposure: nervous system | sensory organs |
Precautionary statements
General: Keep out of reach of children.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. In case of inadequate ventilation wear respiratory protection. Wear protective gloves and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Wash contaminated clothing before reuse. Do NOT induce vomiting. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Call a POISON CENTER or doctor/physician if you feel unwell. Get medical advice/attention if you feel unwell. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up.
Disposal
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3 Other hazards
Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. 21% of the mixture consists of ingredients of unknown acute inhalation toxicity.