Note: Ingredients listed on restricted chemical lists
EC/CAS
822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
<=0.15
General Information
Version
2.00
Revision date
2025-11-04
Product name
3M Scotch-Weld Urethane Structural Adhesive DP-610 (Part A)
1.2.1 Relevant identified uses
Structural adhesive, Part A of a 2-Component Polyurethane Adhesive
supplier name
3M Malaysia Sdn. Bhd
Emergency telephone
+60 03-7884 2888
Icons in SDS
Company Information
company name
3M Malaysia Sdn. Bhd
e-mail address of the competent person responsible for the Safety Data Sheet
3mmyehsr@mmm.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H332, H335
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Acute Toxicity (inhalation): Category 4 Skin Sensitizer: Category 1 Specific Target Organ Toxicity (single exposure): Category 3
Signal word
Warning
Hazard pictograms
Exclamation mark |
Hazard statements
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation.
Prevention
P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P280E Wear protective gloves.
Response
P333 + P313 If skin irritation or rash occurs: Get medical attention.
2.3 Other hazards
Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates.
2.1 Classification of the substance or mixture
Acute Toxicity (inhalation): Category 4. Skin Sensitizer: Category 1. Specific Target Organ Toxicity (single exposure): Category 3. 2.2. Label elements Signal word Warning Symbols Exclamation mark | Pictograms Hazard Statements: H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. Precautionary statements Prevention: P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P280E Wear protective gloves. Response: P333 + P313 If skin irritation or rash occurs: Get medical attention. 2.3. Other hazards Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. SECTION 3: Composition/information on ingredients This material is a mixture. Ingredient C.A.S. No. % by Wt Hexamethylene diisocyanate polymer 28182-81-2 <= 100 Hexamethylene diisocyanate 822-06-0 <= 0.15 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: If exposed, flush eyes with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms develop, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Irritating to the respiratory tract (coughing, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain). Allergic respiratory reaction (difficulty breathing, wheezing, cough, and tightness of chest). Allergic skin reaction (redness, swelling, blistering, and itching). 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Isocyanates During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Hydrogen Cyanide During Combustion Oxides of Nitrogen