General Information
Version
4.00
Revision date
2026-09-18
Product name
Ultimate Quik Wax G2009 [G200916]
1.2.1 Relevant identified uses
Automotive
Emergency telephone
+353 (0)1 809 2166
Icons in SDS
Company Information
company name
3M Ireland Limited
e-mail address of the competent person responsible for the Safety Data Sheet
ner-productstewardship@mmm.com
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Supplemental label elements
EUH210 Safety data sheet available on request. EUH208
Contains
Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4- isothiazolin-3-one (3:1). May produce an allergic reaction. Information required per Regulation (EU) No 528/2012 on Biocidal Products: Contains a biocidal product (preservative) C(M)IT/MIT (3 1)
2.3 Other hazards
None known. This material does not contain any substances that are assessed to be a PBT or vPvB
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. CLASSIFICATION: This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended, on classification, labelling, and packaging of substances and mixtures. 2.2. Label elements CLP REGULATION (EC) No 1272/2008 Not applicable SUPPLEMENTAL INFORMATION: Supplemental Hazard Statements: EUH210 Safety data sheet available on request. EUH208 Contains Reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4- isothiazolin-3-one (3:1). May produce an allergic reaction. Information required per Regulation (EU) No 528/2012 on Biocidal Products: Contains a biocidal product (preservative): C(M)IT/MIT (3:1). 2.3. Other hazards None known. This material does not contain any substances that are assessed to be a PBT or vPvB SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Ingredient Identifier(s) % Classification according to Regulation (EC) No. 1272/2008 [CLP] Non-Hazardous Ingredients Mixture 80 - 100 Substance not classified as hazardous Reaction mass of: 5-chloro-2-methyl-4- (CAS-No.) 55965- < 0.0015 EUH071 isothiazolin-3-one and 2-methyl-4- 84-9 Acute Tox. 3, H301 isothiazolin-3-one (3:1) (EC-No.) 911-418-6 Skin Corr. 1C, H314 Eye Dam. 1, H318 Skin Sens. 1A, H317 Aquatic Acute 1, H400,M=100 Aquatic Chronic 1, H410,M=100 Nota B Acute Tox. 2, H330 Acute Tox. 2, H310 Any entry in the Identifier(s) column that begins with the numbers 6, 7, 8, or 9 are a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. Please see section 16 for the full text of any H statements referred to in this section Specific Concentration Limits Ingredient Identifier(s) Specific Concentration Limits Reaction mass of: 5-chloro-2-methyl-4- (CAS-No.) 55965- (C >= 0.6%) Skin Corr. 1C, H314 isothiazolin-3-one and 2-methyl-4- 84-9 (0.06% =< C < 0.6%) Skin Irrit. 2, H315 isothiazolin-3-one (3:1) (EC-No.) 911-418-6 (C >= 0.6%) Eye Dam. 1, H318 (0.06% =< C < 0.6%) Eye Irrit. 2, H319 (C >= 0.0015%) Skin Sens. 1A, H317 For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation No need for first aid is anticipated. If symptoms develop, remove the affected person to fresh air. Get medical attention. Skin contact If exposed, wash with soap and water. If signs/symptoms develop, get medical attention. Eye contact Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. If swallowed Do not induce vomiting. Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During combustion. Carbon dioxide. During combustion. 5.3. Advice for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Ventilate the area with fresh air. Use personal protective equipment based on the results of an exposure assessment. Refer to Section 8 for PPE recommendations. If anticipated exposure resulting from an accidental release exceeds the protective capabilities of the PPE listed in Section 8, or are unknown, select PPE that offers an appropriate level of protection. Consider the physical and chemical hazards of the material when doing so. Examples of PPE ensembles for emergency response could include wearing bunker gear for a release of flammable material; wearing chemical protective clothing if the spilled material is a corrosive, a sensitizer, a significant dermal irritant, or can be absorbed through the skin; or donning a positive pressure supplied-air respirator for chemicals with inhalation hazards. For information regarding physical and health hazards, refer to sections 2 and 11 of the SDS. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially