3M Scotch-Weld Urethane Adhesive EC-3549 B/A Part B

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Supplemental label elements

EUH210 Safety data sheet available on request. EUH208

Contains

2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. May produce an allergic reaction.

2.3 Other hazards

None known. This material does not contain any substances that are assessed to be a PBT or vPvB

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. CLASSIFICATION: This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended, on classification, labelling, and packaging of substances and mixtures. 2.2. Label elements CLP REGULATION (EC) No 1272/2008 Not applicable For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: No hazard statements are required for containers <=125 mL. SUPPLEMENTAL INFORMATION: Supplemental Hazard Statements: EUH210 Safety data sheet available on request. EUH208 Contains 2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. May produce an allergic reaction. 2.3. Other hazards None known. This material does not contain any substances that are assessed to be a PBT or vPvB SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Ingredient Identifier(s) % Classification according to Regulation (EC) No. 1272/2008 [CLP] Polyester resin Trade Secret 30 - 60 Substance not classified as hazardous Propane-1,2-diol, propoxylated (CAS-No.) 25322-69-4 10 - 30 Acute Tox. 4, H302 Talc (CAS-No.) 14807-96-6 10 - 30 Substance with a national occupational (EC-No.) 238-877-9 exposure limit Propylidynetrimethanol, propoxylated (CAS-No.) 25723-16-4 3 - 7 Substance not classified as hazardous (EC-No.) 500-041-9 Zeolites (CAS-No.) 1318-02-1 < 3 Substance not classified as hazardous (EC-No.) 215-283-8 4,4'-Methylenebis[2,6-diethylaniline (CAS-No.) 13680-35-8 < 1.2 Aquatic Chronic 2, H411 (EC-No.) 237-185-4 Acute Tox. 4, H302 2-(3,4- (CAS-No.) 3388-04-3 < 1 Aquatic Chronic 3, H412 Epoxycyclohexyl)ethyltrimethoxysilane (EC-No.) 222-217-1 Skin Sens. 1, H317 Please see section 16 for the full text of any H statements referred to in this section For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Remove person to fresh air. If you feel unwell, get medical attention. Skin contact Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye contact If exposed, flush eyes with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms develop, get medical attention. If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a carbon dioxide or dry chemical extinguisher to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During combustion. Carbon dioxide. During combustion. Irritant vapours or gases. During combustion. 5.3. Advice for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Use personal protective equipment based on the results of an exposure assessment. Refer to Section 8 for PPE recommendations. If anticipated exposure resulting from an accidental release exceeds the protective capabilities of the PPE listed in Section 8, or are unknown, select PPE that offers an appropriate level of protection. Consider the physical and chemical hazards of the material when doing so. Examples of PPE ensembles for emergency response could include wearing bunker gear for a release of flammable material; wearing chemical protective clothing if the spilled material is a corrosive, a sensitizer, a significant dermal irritant, or can be absorbed through the skin; or donning a positive pressure supplied-air respirator for chemicals with inhalation hazards. For information regarding physical and health hazards, refer to sections 2 and 11 of the SDS. Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and Safety Data Sheet. Seal the container. Dispose of collected material as soon as possible. 6.4. Reference to other sections Refer to Section 8 and Section 13 for more information SECTION 7: Handling and storage 7.1. Precautions for safe handling