3M Scotch-Weld Urethane Adhesive EC-3532 B/A Part B

3M Ireland Limited

Revision date : 2025-08-29

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

25322-69-4

Name of the chemical

polypropyleneglycol

Concentration

30-60 10-30

EC/CAS

238-877-9/14807-96-6

Name of the chemical

Talc

Concentration

10-30

EC/CAS

205-743-6/149-57-5

Name of the chemical

2-ethylhexanoic acid

Concentration

<0.3

EC/CAS

234-186-1/10584-98-2

Name of the chemical

Dibutyltinbis(2-ethylhexyl mercaptoacetate)

Concentration

<0.22

Listed in

General Information

Version

7.04

Revision date

2025-08-29

Product name

3M Scotch-Weld Urethane Adhesive EC-3532 B/A Part B

1.2.1 Relevant identified uses

Base for 2-Part Urethane Adhesive

Emergency telephone

+44 (0)1344 858 000

Icons in SDS

Company Information

company name

3M Ireland Limited

e-mail address of the competent person responsible for the Safety Data Sheet

tox.uk@mmm.com

Section 2

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Supplemental label elements

EUH210 Safety data sheet available on request. EUH208

Contains

2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. | 2-Ethylhexyl 4,4-dibutyl- 10-ethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate. May produce an allergic reaction.

2.3 Other hazards

None known. This material does not contain any substances that are assessed to be a PBT or vPvB

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. CLASSIFICATION: This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended, on classification, labelling, and packaging of substances and mixtures. 2.2. Label elements CLP REGULATION (EC) No 1272/2008 Not applicable SUPPLEMENTAL INFORMATION: Supplemental Hazard Statements: EUH210 Safety data sheet available on request. EUH208 Contains 2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane. | 2-Ethylhexyl 4,4-dibutyl- 10-ethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate. May produce an allergic reaction. 2.3. Other hazards None known. This material does not contain any substances that are assessed to be a PBT or vPvB SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Ingredient Identifier(s) % Classification according to Regulation (EC) No. 1272/2008 [CLP] Polyester resin Trade Secret 30 - 60 Substance not classified as hazardous Propane-1,2-diol, propoxylated (CAS-No.) 25322-69-4 10 - 30 Acute Tox. 4, H302 Talc (CAS-No.) 14807-96-6 10 - 30 Substance with a national occupational (EC-No.) 238-877-9 exposure limit Propylidynetrimethanol, propoxylated (CAS-No.) 25723-16-4 3 - 7 Substance not classified as hazardous (EC-No.) 500-041-9 Zeolites (CAS-No.) 1318-02-1 1 - 5 Substance not classified as hazardous (EC-No.) 215-283-8 4,4'-Methylenebis[2,6-diethylaniline (CAS-No.) 13680-35-8 < 2.5 Aquatic Chronic 2, H411 (EC-No.) 237-185-4 Acute Tox. 4, H302 2-(3,4- (CAS-No.) 3388-04-3 < 1 Aquatic Chronic 3, H412 Epoxycyclohexyl)ethyltrimethoxysilane (EC-No.) 222-217-1 Skin Sens. 1, H317 2-ethylhexanoic acid (CAS-No.) 149-57-5 < 0.3 Repr. 2, H361d (EC-No.) 205-743-6 2-Ethylhexyl 4,4-dibutyl-10-ethyl-7-oxo- (CAS-No.) 10584-98-2 < 0.22 Aquatic Acute 1, H400,M=10 8-oxa-3,5-dithia-4-stannatetradecanoate (EC-No.) 234-186-1 Acute Tox. 3, H331 Acute Tox. 3, H311 Acute Tox. 4, H302 Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1B, H317 Muta. 2, H341 Repr. 1B, H360FD STOT SE 1, H370 STOT RE 1, H372 Please see section 16 for the full text of any H statements referred to in this section For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Remove person to fresh air. If you feel unwell, get medical attention. Skin contact Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye contact Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During combustion. Carbon dioxide. During combustion. 5.3. Advice for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and Safety Data Sheet. Seal the container. Dispose of collected material as soon as possible.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.