3M 08537 Brushable Seam Sealer

Hazard statements (CLP)

H228, H315, H336, H412

Code

Statements

H228

Flammable solid

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS02 (Flame) |GHS07 (Exclamation mark) | Ingredients: Ingredient CAS Nbr EC No. % by Wt Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics 927-510-4 5 - 10 Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, 919-857-5 < 10 < 2% aromatics Reaction mass of ethylbenzene and xylene 905-588-0 < 10

Hazard statements

H228 Flammable solid. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261A Avoid breathing vapours.

Response

P370 + P378 In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Supplemental label elements

EUH018 In use, may form flammable/explosive vapour-air mixture. Provide ventilation adequate to maintain vapour concentration below lower explosive concentration. 77% of the mixture consists of components of unknown acute oral toxicity. 77% of the mixture consists of components of unknown acute dermal toxicity. 77% of the mixture consists of components of unknown acute inhalation toxicity.

Contains

77% of components with unknown hazards to the aquatic environment EU VOC Directive (2004/42/EC) labelling: 2004/42/EC IIB(e)(840) 470g/l

2.3 Other hazards

None known. This material does not contain any substances that are assessed to be a PBT or vPvB

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The aspiration hazard classification is not required due to the product's physical form. CLASSIFICATION: Flammable Solid, Category 1 - Flam. Sol. 1; H228 Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Specific Target Organ Toxicity-Single Exposure, Category 3 - STOT SE 3; H336 Hazardous to the Aquatic Environment (Chronic), Category 3 - Aquatic Chronic 3; H412 For full text of H phrases, see Section 16.