3M(TM) Scotch-Weld(TM) Instant Adhesive Primer AC78

Hazard statements (CLP)

H225, H304, H315, H336

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

Hazard classification Flammable Liquid: Category 2 Skin Corrosion/Irritation: Category 2 Specific Target Organ Toxicity (single exposure): Category 3 Aspiration Hazard: Category 1

Hazard pictograms

Flame |Exclamation mark |Health Hazard |

Hazard statements

Highly flammable liquid and vapor. Causes skin irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways.

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapors. Wash exposed skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves, eye protection, and face protection.

Response

IF SWALLOWED OR INHALED: Immediately call a POISON CENTER or doctor. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Do NOT induce vomiting. If skin irritation occurs: Get medical advice. Take off contaminated clothing and wash it before reuse. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Storage

Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents and container in accordance with applicable local, regional, national, and international regulations.

2.1 Classification of the substance or mixture

Flammable Liquid: Category 2. Skin Corrosion/Irritation: Category 2. Specific Target Organ Toxicity (single exposure): Category 3. Aspiration Hazard: Category 1.