Note: Ingredients listed on restricted chemical lists
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2013-05-28
Product name
3M(TM) Perfect-It(TM) Rubbing Compound PN 06085, 06086, 06087, 39060, 6070
CAS No.
7732-18-5
Manufacturer Name
3M(TM) Perfect-It(TM) Rubbing Compound PN 06085
Icons in SDS
Company Information
company name
3m company
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) 3.1 EMERGENCY OVERVIEW Odor, Color, Grade: Creamy off-white liquid; Solvent odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: May cause allergic skin reaction. Contains a chemical or chemicals which can cause cancer. May cause target organ effects.
Potential health effects
Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Skin Contact: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Inhalation: Intentional concentration and inhalation may be harmful or fatal. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Prolonged or repeated exposure may cause: Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of sputum, and changes in lung function tests. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient C.A.S. No. Class Description Regulation NAPHTHALENE 91-20-3 Grp. 2B: Possible human carc. International Agency for Research on Cancer NAPHTHALENE 91-20-3 Anticipated human carcinogen National Toxicology Program Carcinogens SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature No Data Available Flash Point No flash point Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. 6.2. Environmental precautions For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Clean-up methods Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Avoid eye contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid skin contact. Keep out of the reach of children. Store work clothes separately from other clothing, food and tobacco products. No smoking: Smoking while using this product can result in contamination of the tobacco and/or smoke and lead to polymer fume fever caused by the formation of the hazardous decomposition products mentioned in the Reactivity Data section of this MSDS. Do not breathe vapors. Do not breathe dust.
Storage
Keep container in well-ventilated area. Store away from areas where product may come into contact with food or pharmaceuticals. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Provide appropriate local exhaust ventilation on open containers. Use in an enclosed process area is recommended. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Use in a well-ventilated area. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. The following eye protection(s) are recommended: Safety Glasses with side shields Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Neoprene Nitrile Rubber . 8.2.3 Respiratory Protection Do not breathe vapors. Do not breathe dust. An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Not applicable. 8.3 EXPOSURE GUIDELINES Ingredient Authority Type Limit
Additional information
ALUMINUM OXIDE CMRG TWA 1 fiber/cc ALUMINUM OXIDE OSHA TWA, respirable 5 mg/m3 fraction ALUMINUM OXIDE OSHA TWA, as total dust 15 mg/m3 ALUMINUM OXIDE (FIBROUS FORMS OSHA TWA, respirable 5 mg/m3 ONLY) fraction ALUMINUM OXIDE (FIBROUS FORMS OSHA TWA, as total dust 15 mg/m3 ONLY) Aluminum, insoluble compounds ACGIH TWA, respirable 1 mg/m3 fraction KEROSENE ACGIH TWA, as total 200 mg/m3 Skin Notation* hydrocarbon vapor, non-aerosol KEROSENE CMRG TWA 500 ppm MINERAL OILS, HIGHLY-REFINED OILS ACGIH TWA, inhalable 5 mg/m3 fraction NAPHTHALENE ACGIH TWA 10 ppm Skin Notation* NAPHTHALENE ACGIH STEL 15 ppm Skin Notation* NAPHTHALENE OSHA TWA 50 mg/m3 Paraffin oil OSHA TWA, as mist 5 mg/m3 WHITE MINERAL OIL (PETROLEUM) CMRG TWA 5 mg/m3 WHITE MINERAL OIL (PETROLEUM) CMRG STEL 10 mg/m3 * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption. SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odor, Color, Grade: Creamy off-white liquid; Solvent odor General Physical Form: Liquid Autoignition temperature No Data Available Flash Point No flash point Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Boiling Point 100 ºC Density 1.06 - 1.08 g/ml Vapor Pressure 18 mmHg [@ 20 ºC] Specific Gravity 1.06 - 1.08 [Ref Std: WATER=1] pH 7.5 - 8.5 Solubility in Water Moderate Evaporation rate No Data Available Hazardous Air Pollutants 0.1 % weight [Test Method: Calculated] Volatile Organic Compounds 16.1 % weight [Test Method: calculated per CARB title 2] Volatile Organic Compounds 176 g/l [Test Method: calculated SCAQMD rule 443.1] Kow - Oct/Water partition coef No Data Available Percent volatile 80.6 % VOC Less H2O & Exempt Solvents 563 g/l [Test Method: calculated SCAQMD rule 443.1] Viscosity 30,000 - 38,000 centipoise [@ 77 ºF] [Details: #6 Spindle] SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: 10.1 Conditions to avoid None known 10.2 Materials to avoid None known Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During Combustion Carbon dioxide During Combustion Oxides of Nitrogen During Combustion
TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. CHEMICAL FATE INFORMATION SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose of waste product in a permitted hazardous waste facility. Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): LB-K100-0674-3, LB-K100-0309-2, LB-K100-1314-4, 60-4550-3485-4, 60-4550-3486-2, 60-4550-3487-0, 60-4550-3488-8, 60- 4550-3638-8, 60-4550-3747-7, 60-4550-3748-5, 60-4550-5178-3, 60-4550-5180-9, 60-4550-5181-7, 60-4550-5256-7, XG-0038- 1447-0 For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt ALUMINUM OXIDE 1344-28-1 10 - 30 ALUMINUM OXIDE (ALUMINUM OXIDE 1344-28-1 10 - 30 (FIBROUS FORMS ONLY)) STATE REGULATIONS Contact 3M for more information. CALIFORNIA PROPOSITION 65 Ingredient C.A.S. No.
2.1 Classification of the substance or mixture
NAPHTHALENE 91-20-3 **Carcinogen ** WARNING: contains a chemical which can cause cancer. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Further information
NFPA Hazard Classification Health 2 Flammability 1 Reactivity 0 Special None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 1: Product name was modified. Section 3: Potential effects from skin contact information was modified. Section 8: Respiratory protection - recommended respirators information was modified. Section 8: Respiratory protection - recommended respirators was modified. Page Heading: Product name was modified. Section 9: Property description for optional properties was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 14: ID Number(s) Template 1 was modified. Section 2: Ingredient table was modified. Copyright was modified. Section 9: Solubility in water value was deleted. Section 8: Respiratory protection - recommended respirators punctuation was deleted. Section 12: Ecotoxicological phrase was deleted. Section 12: Chemical Fate phrase was deleted. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M 3M USA MSDSs are available at www.3M.com SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3M™ Perfect-It™ Machine Polish PN 06064, 06065, 06072, 06053, 39061 MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours) Issue date 07/02/13 Supercedes Date: 10/21/10 Document Group: 24-2283-0 Product Use: Intended Use: Automotive SECTION 2: INGREDIENTS Ingredient C.A.S. No. % by Wt WATER 7732-18-5 50 - 70 DISTILLATES (PETROLEUM), ACID TREATED, LIGHT 64742-14-9 5 - 15 ALUMINUM OXIDE 1344-28-1 5 - 13 DECAMETHYLCYCLOPENTASILOXANE 541-02-6 3 - 7 DODECAMETHYLCYCLOHEXASILOXANE 540-97-6 1 - 5 ALUMINUM SILICATE CLAY 66402-68-4 1 - 5 SECTION 3: HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Specific Physical Form: Emulsion Odor, Color, Grade: Petroleum distillate odor, grey viscous liquid General Physical Form: Liquid Immediate health, physical, and environmental hazards: Combustible liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause target organ effects. MATERIAL SAFETY DATA SHEET 3M™ Perfect-It™ Machine Polish PN 06064, 06065, 06072, 06053, 39061 07/02/13 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Prolonged or repeated exposure may cause: Dermal Effects: Signs/symptoms may include redness, itching, acne, or bumps on the skin. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Prolonged or repeated exposure may cause: Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of sputum, and changes in lung function tests. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.