3M Surface Pre-Treatment AC-131

3M Canada Company

Revision date : 2020-10-28

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS05 GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

64-19-7

Name of the chemical

acetic acid

Concentration

100%

General Information

Version

1.01

Revision date

2020-10-28

Product name

3M Surface Pre-Treatment AC-131

CAS No.

64-19-7

1.2.1 Relevant identified uses

Metal Adhesion Promoter

supplier name

3M Canada Company

Emergency telephone

1-800-364-3577, (800) 364-3577

Icons in SDS

GHS02 GHS05 GHS07 GHS08 M004 M009 M010 M013 M017

Company Information

company name

3M Canada Company

Hazard Codes

Hazard statements (CLP)

H312, H314, H332, H370

Hazard statements

Code

Statements

H312

Harmful in contact with skin

Section 2

SECTION 2: Hazards identification

Classification of the substance or mixture Flammable Liquid: Category 3 Acute Toxicity (dermal): Category 4 Acute Toxicity (inhalation): Category 4 Serious Eye Damage/Irritation: Category 1 Skin Corrosion/Irritation: Category 1A Specific Target Organ Toxicity (single exposure): Category 1

2.2 Label elements

3M™ Surface Pre-Treatment AC-131 (Part A)

Hazard pictograms

Flame | Corrosion | Exclamation mark

Health hazards

|

Hazard statements

Flammable liquid and vapour. Harmful in contact with skin. Causes severe skin burns and eye damage. Harmful if inhaled. Causes damage to organs: blood or blood-forming organs | kidney/urinary tract | respiratory system |

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground and bond container and receiving equipment. Use non-sparking tools. Take action to prevent static discharges. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product. Wash exposed skin thoroughly after handling.

Response

IF INHALED Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE or doctor/physician. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF exposed or concerned Call a POISON CENTRE or doctor/physician. In case of fire Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Storage

Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/container in accordance with applicable local/regional/national/international regulations.

2.3 Other hazards

May cause chemical gastrointestinal burns.

2.1 Classification of the substance or mixture

Flammable Liquid: Category 3. Acute Toxicity (dermal): Category 4. Acute Toxicity (inhalation): Category 4. Serious Eye Damage/Irritation: Category 1. Skin Corrosion/Irritation: Category 1A. Specific Target Organ Toxicity (single exposure): Category 1.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.