Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
80-05-7
Name of the chemical
4,4'-isopropylidenediphenol
Concentration
N/A
General Information
Revision date
2015-06-18
Product name
3M Scotchkote 226N Slow 8G and 11G Fusion Bonded Epoxy Coating
Icons in SDS
Company Information
company name
3m company
e-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319
Hazard statements
Code
Statements
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 Serious Eye Damage/Eye Irritation, Category 2 - Eye Irrit. 2; H319 Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Skin Sensitization, Category 1 - Skin Sens. 1; H317 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Signal word
WARNING.
Hazard pictograms
GHS07 (Exclamation mark) | Ingredient CAS Nbr % by Wt Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2,2'-[(1- 25036-25-3 50 - 70 methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro- 25068-38-6 1 - 5 2,3-epoxypropane
Hazard statements
H319 Causes serious eye irritation. H315 Causes skin irritation. H317 May cause an allergic skin reaction.
Prevention
P280E Wear protective gloves.
Response
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. 1% of the mixture consists of components of unknown acute oral toxicity.
Contains
71% of components with unknown hazards to the aquatic environment Notes on labelling Average molecular weight of epoxy resin(s) is >700.
2.3 Other hazards
Dust clouds of this material in sufficient concentration in combination with an ignition source may be explosive. Dust deposits should not be allowed to accumulate on surfaces because of the potential for secondary explosions. May form combustible dust concentrations in air.