Note: Ingredients listed on restricted chemical lists
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
30-50 15-35
EC/CAS
9046-10-0
Name of the chemical
Poly(propyleneglycol)diamine
Concentration
5 - 15
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
1 - 10
EC/CAS
10043-35-3
Name of the chemical
Borsäure Borsäure
Concentration
< 0.3
General Information
Version
6.02
Revision date
2026-09-17
Product name
3M Scotch-Weld Structural Void Filling Compound EC-3555 B/A FST, Part A
1.2.1 Relevant identified uses
Structural adhesive
supplier name
3M
Manufacturer Name
3M
Emergency telephone
1-800-364-3577, (651) 737-6501
Icons in SDS
Company Information
company name
3M
Hazard Codes
Hazard statements (CLP)
H302, H314, H317, H360, H370
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Hazard classification Corrosive to metal: Category 1 Acute Toxicity (oral): Category 4 Serious Eye Damage/Irritation: Category 1 Skin Corrosion/Irritation: Category 1C Skin Sensitizer: Category 1A Reproductive Toxicity: Category 1B Specific Target Organ Toxicity (single exposure): Category 1
Hazard pictograms
Corrosion | Exclamation mark | Health Hazard |
Hazard statements
May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May damage fertility or the unborn child. Causes damage to organs: blood or blood-forming organs |
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in original container. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF exposed or concerned: Get medical advice/attention. Specific treatment (see Notes to Physician on this label). Absorb spillage to prevent material damage.
Storage
Store in a corrosive resistant container with a resistant inner liner. Store locked up.
Disposal
Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be considered as part of the medical management.
2.3 Other hazards
May cause chemical gastrointestinal burns. 50% of the mixture consists of ingredients of unknown acute oral toxicity. 51% of the mixture consists of ingredients of unknown acute dermal toxicity. 72% of the mixture consists of ingredients of unknown acute inhalation toxicity.
2.1 Classification of the substance or mixture
Corrosive to metal: Category 1. Acute Toxicity (oral): Category 4. Serious Eye Damage/Irritation: Category 1. Skin Corrosion/Irritation: Category 1C. Skin Sensitizer: Category 1A. Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (single exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Corrosion | Exclamation mark | Health Hazard | Pictograms Hazard Statements May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May damage fertility or the unborn child. Causes damage to organs: blood or blood-forming organs | Precautionary Statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in original container. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF exposed or concerned: Get medical advice/attention. Specific treatment (see Notes to Physician on this label). Absorb spillage to prevent material damage. Storage: Store in a corrosive resistant container with a resistant inner liner. Store locked up. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be considered as part of the medical management. 2.3. Hazards not otherwise classified May cause chemical gastrointestinal burns. 50% of the mixture consists of ingredients of unknown acute oral toxicity. 51% of the mixture consists of ingredients of unknown acute dermal toxicity. 72% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No.