3M Scotch-Weld Structural Void Filling Compound EC-3550 B/A FST, Part A

Hazard statements (CLP)

H290, H314, H317, H341, H361, H370

Code

Statements

H290

May be corrosive to metals

SECTION 2: Hazards identification

Hazard classification Corrosive to metal: Category 1 Skin Corrosion/Irritation: Category 1C Serious Eye Damage/Irritation: Category 1 Skin Sensitizer: Category 1 Germ Cell Mutagenicity: Category 2 Reproductive Toxicity: Category 2 Specific Target Organ Toxicity (single exposure): Category 1

Hazard pictograms

Corrosion |Exclamation mark |Health Hazard |

Hazard statements

May be corrosive to metals. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Suspected of causing genetic defects. Suspected of damaging fertility or the unborn child. Causes damage to organs: blood or blood-forming organs.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in original packaging. Do not breathe vapors. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, and face protection.

Response

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTER or doctor. Specific treatment (see Notes to Physician on this label). If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. Absorb spillage to prevent material damage.

Storage

Store locked up. Store in a corrosion-resistant container with a resistant inner liner.

Disposal

Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be consider as part of the medical management

2.3 Other hazards

May cause chemical gastrointestinal burns. 1% of the mixture consists of ingredients of unknown acute dermal toxicity.

2.1 Classification of the substance or mixture

Corrosive to metal: Category 1. Skin Corrosion/Irritation: Category 1C. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1. Germ Cell Mutagenicity: Category 2. Reproductive Toxicity: Category 2. Specific Target Organ Toxicity (single exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Corrosion |Exclamation mark |Health Hazard | Pictograms Hazard Statements May be corrosive to metals. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Suspected of causing genetic defects. Suspected of damaging fertility or the unborn child. Causes damage to organs: blood or blood-forming organs. Precautionary statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in original packaging. Do not breathe vapors. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, and face protection. Response: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTER or doctor. Specific treatment (see Notes to Physician on this label). If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. Absorb spillage to prevent material damage. Storage: Store locked up. Store in a corrosion-resistant container with a resistant inner liner. Disposal: Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be consider as part of the medical management 2.3. Hazards not otherwise classified May cause chemical gastrointestinal burns.