Note: Ingredients listed on restricted chemical lists
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
<20
EC/CAS
9046-10-0
Name of the chemical
Poly(propyleneglycol)diamine
Concentration
< 10
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
< 3
EC/CAS
15245-12-2
Name of the chemical
Nitric acid, ammonium calcium salt
Concentration
< 3
General Information
Version
1.02
Revision date
2026-09-17
Product name
3M Scotch-Weld Structural Void Filling Compound EC-2818 FR, Part A
1.2.1 Relevant identified uses
Void filling and poting compound for Aerospace applications, Industrial use
supplier name
3M
Manufacturer Name
3M
Emergency telephone
1-800-364-3577, (651) 737-6501
Icons in SDS
Company Information
company name
3M
Hazard Codes
Hazard statements (CLP)
H290, H314, H317, H370
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
Hazard classification Corrosive to metal: Category 1 Skin Corrosion/Irritation: Category 1B Serious Eye Damage/Irritation: Category 1 Skin Sensitizer: Category 1 Specific Target Organ Toxicity (single exposure): Category 1
Hazard pictograms
Corrosion |Exclamation mark |Health Hazard |
Hazard statements
May be corrosive to metals. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Causes damage to organs: blood or blood-forming organs.
Prevention
Keep only in original packaging. Do not breathe vapors or dust. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, and face protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTER or doctor. Specific treatment (see Notes to Physician on this label). If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. Absorb spillage to prevent material damage.
Storage
Store locked up. Store in a corrosion-resistant container with a resistant inner liner.
Disposal
Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be consider as part of the medical management
2.3 Other hazards
May cause chemical gastrointestinal burns. 15% of the mixture consists of ingredients of unknown acute oral toxicity. 15% of the mixture consists of ingredients of unknown acute dermal toxicity.
2.1 Classification of the substance or mixture
Corrosive to metal: Category 1. Skin Corrosion/Irritation: Category 1B. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1. Specific Target Organ Toxicity (single exposure): Category 1.
