General Information
Revision date
2020-03-13
Product name
3M Scotch-Weld Structural Plastic Adhesive DP8010NS and Structural Plastic Adhesive 8010NS, Part A
Icons in SDS
Company Information
company name
3m company
e-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H317, H318, H330, H334, H341
Hazard statements
Code
Statements
H302
Harmful if swallowed
H317
May cause an allergic skin reaction
H318
Causes serious eye damage.
H330
Fatal if inhaled
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H341
Suspected of causing genetic defects
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 Acute Toxicity, Category 4 - Acute Tox. 4; H302 Serious Eye Damage/Eye Irritation, Category 1 - Eye Dam. 1; H318 Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 Skin Sensitization, Category 1 - Skin Sens. 1; H317 Germ Cell Mutagenicity, Category 2 - Muta. 2; H341 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Hazard pictograms
GHS05 (Corrosion) | GHS07 (Exclamation mark) | GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt Polyfunctional Aziridine 64265-57-2 264-763-3 10 - 30 Amine Borane Complex 223674-50-8 426-100-8 1 - 15
Hazard statements
H302 Harmful if swallowed. H318 Causes serious eye damage. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H341 Suspected of causing genetic defects.
Prevention
P261A Avoid breathing vapours. P280B Wear protective gloves and eye/face protection. P261A Avoid breathing vapours. P280B Wear protective gloves and eye/face protection.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTRE or doctor/physician. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H318 Causes serious eye damage. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H341 Suspected of causing genetic defects. <=125 ml Precautionary statements P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTRE or doctor/physician. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. 57% of the mixture consists of components of unknown acute oral toxicity.
Contains
43% of components with unknown hazards to the aquatic environment Notes on labelling Polyfunctional aziridine is classified as Acute Tox. 2 (H330) based on dust/mist (aerosol) data. When incorporated into this product, this substance cannot become aerosolized. Based on available toxicology data and this substance's very low vapour pressure, the saturated vapour of polyfunctional aziridine is not expected to be acutely toxic. Therefore, the classification is not applicable for this material when used as intended.
2.3 Other hazards
None known.