3M Scotch-Weld Structural Plastic Adhesive DP8010 and Structural Plastic Adhesive 8010, Part A

Hazard statements (CLP)

H302, H317, H318, H330, H334, H341

Code

Statements

H302

Harmful if swallowed

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. Acute Toxicity, Category 4 - Acute Tox. 4; H302 Serious Eye Damage/Eye Irritation, Category 1 - Eye Dam. 1; H318 Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 Skin Sensitization, Category 1 - Skin Sens. 1; H317 Germ Cell Mutagenicity, Category 2 - Muta. 2; H341 For full text of H phrases, see Section 16.

2.2 Label elements

CLP REGULATION (EC) No 1272/2008

Hazard pictograms

GHS05 (Corrosion) |GHS07 (Exclamation mark) |GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt Polyfunctional Aziridine 64265-57-2 264-763-3 10 - 30 Amine Borane Complex 223674-50-8 426-100-8 1 - 15

Hazard statements

H302 Harmful if swallowed. H318 Causes serious eye damage. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H341 Suspected of causing genetic defects.

Prevention

P261A Avoid breathing vapours. P280B Wear protective gloves and eye/face protection. P261A Avoid breathing vapours. P280B Wear protective gloves and eye/face protection.

Response

P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTRE or doctor/physician. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H318 Causes serious eye damage. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H341 Suspected of causing genetic defects. <=125 ml Precautionary statements P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTRE or doctor/physician. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. 62% of the mixture consists of components of unknown acute oral toxicity.

Contains

46% of components with unknown hazards to the aquatic environment Notes on labelling Polyfunctional aziridine is classified as Acute Tox. 2 (H330) based on dust/mist (aerosol) data. When incorporated into this product, this substance cannot become aerosolized. Based on available toxicology data and this substance's very low vapour pressure, the saturated vapour of polyfunctional aziridine is not expected to be acutely toxic. Therefore, the classification is not applicable for this material when used as intended.

2.3 Other hazards

Persons previously sensitised to amines may develop a cross-sensitisation reaction to certain other amines.