3M Scotch-Weld Multi-Material Composite Urethane Adhesive DP6330NS, Kit

3M Canada Company

Revision date : 2026-07-14

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

20-40

EC/CAS

14807-96-6

Name of the chemical

Talc

Concentration

10 - 30

General Information

Version

4.02

Revision date

2026-07-14

Product name

3M Scotch-Weld Multi-Material Composite Urethane Adhesive DP6330NS, Kit

1.2.1 Relevant identified uses

Adhesive

supplier name

3M Canada Company

Emergency telephone

1800 364 3577, (800) 364-3577

Icons in SDS

GHS07 GHS08 M004 M009 M010 M011 M017 M026

Company Information

company name

3M Canada Company

Hazard Codes

Hazard statements (CLP)

H317, H319, H334, H335, H372

Hazard statements

Code

Statements

H317

May cause an allergic skin reaction

Section 2

SECTION 2: Hazards identification

Classification of the substance or mixture Skin Corrosion/Irritation: Category 2 Serious Eye Damage/Irritation: Category 2A Respiratory Sensitizer: Category 1 Skin Sensitizer: Category 1A Specific Target Organ Toxicity (repeated exposure): Category 1 Specific Target Organ Toxicity (single exposure): Category 3 3M™ Scotch-Weld™ Multi-Material Composite Urethane Adhesive DP6330NS, Part A

Hazard pictograms

Exclamation mark |Health Hazard |

Hazard statements

Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation. Causes damage to organs through prolonged or repeated exposure: respiratory system.

Prevention

Do not breathe vapours. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves and eye protection. In case of inadequate ventilation wear respiratory protection.

Response

IF ON SKIN Wash with plenty of soap and water. IF INHALED Call a POISON CENTER or doctor if you feel unwell IF INHALED Remove person to fresh air and keep comfortable for breathing. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if you feel unwell. If eye irritation persists or if skin irritation or rash occurs: Get medical attention. If experiencing respiratory symptoms: Call a POISON CENTER or doctor. Take off contaminated clothing and wash it before reuse.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents and container in accordance with applicable local, regional, national, and international regulations.

2.3 Other hazards

None known.

2.1 Classification of the substance or mixture

Skin Corrosion/Irritation: Category 2. Serious Eye Damage/Irritation: Category 2A. Respiratory Sensitizer: Category 1. Skin Sensitizer: Category 1A. Specific Target Organ Toxicity (repeated exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3. 3M™ Scotch-Weld™ Multi-Material Composite Urethane Adhesive DP6330NS, Part A

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.