Note: Ingredients listed on restricted chemical lists
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
10 - 30
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
<1
EC/CAS
119-47-1
Name of the chemical
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol
Concentration
0.1 - 1
EC/CAS
98-82-8
Name of the chemical
Cumol (2022/692)
Concentration
0.1 - 1
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
<=0.099
EC/CAS
106-99-0
Name of the chemical
1,3-Butadien
Concentration
<=0.099
EC/CAS
107-13-1
Name of the chemical
Acrylonitrile
Concentration
<=0.099
General Information
Version
18.03
Revision date
2026-09-24
Product name
3M Scotch-Weld Low Odour Acrylic Adhesive 810 B/A (Part A)
1.2.1 Relevant identified uses
Structural adhesive
supplier name
3M Canada Company
Emergency telephone
1800 364 3577
Icons in SDS
Company Information
company name
3M Canada Company
Hazard Codes
Hazard statements (CLP)
H317, H318, H335, H350, H360, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H318
Causes serious eye damage.
H335
May cause respiratory irritation
H350
May cause cancer
H360
May damage fertility or the unborn child
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Skin Corrosion/Irritation: Category 2 Serious Eye Damage/Irritation: Category 1 Skin Sensitizer: Category 1A Carcinogenicity: Category 1B Reproductive Toxicity: Category 1B Specific Target Organ Toxicity (repeated exposure): Category 1 Specific Target Organ Toxicity (single exposure): Category 3
Hazard pictograms
Corrosion |Exclamation mark |Health Hazard |
Hazard statements
Causes skin irritation. Causes serious eye damage. May cause an allergic skin reaction. May cause cancer. May damage fertility or the unborn child. May cause respiratory irritation. Causes damage to organs through prolonged or repeated exposure: respiratory system.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe vapours. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, eye protection, face protection, and if needed, respiratory protection (see SDS Section 8).
Response
IF ON SKIN Wash with plenty of soap and water. IF INHALED Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTRE or doctor. Get medical attention if you feel unwell. If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents and container in accordance with applicable local, regional, national, and international regulations.
2.3 Other hazards
None known. 20% of the mixture consists of ingredients of unknown acute inhalation toxicity.
2.1 Classification of the substance or mixture
Skin Corrosion/Irritation: Category 2. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1A. Carcinogenicity: Category 1B. Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (repeated exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3.