Note: Ingredients listed on restricted chemical lists
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
0.1-1
EC/CAS
293-728-5/91082-17-6
Name of the chemical
alkyl(C10-C21)sulphonic acid, esters with phenol
Concentration
10-30
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
1-5
EC/CAS
70775-94-9
Name of the chemical
Sulfonic acids, C10-18-alkane, phenyl esters
Concentration
10-30
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-5
General Information
Revision date
2021-09-08
Product name
3M Polyurethane Seam Sealer Beige PN 08365
Icons in SDS
Company Information
company name
3m company
e-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The carcinogenicity classification for titanium dioxide is not applicable based on physical form (material is not a powder). This material has been tested for eye damage/irritation and the test results do not meet the criteria for classification. Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 Skin Sensitization, Category 1A - Skin Sens. 1A; H317 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Hazard pictograms
GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt 4,4'-methylenediphenyl diisocyanate 101-68-8 202-966-0 0.1 - 1 Reaction mass of Bis(1,2,2,6,6-pentamethyl-4- 915-687-0 <= 0.1 piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl- 4-piperidyl sebacate
Hazard statements
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction.
Prevention
P261A Avoid breathing vapours. P280E Wear protective gloves.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician.
Supplemental label elements
EUH204 Contains isocyanates. May produce an allergic reaction. EUH210 Safety data sheet available on request. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. 2% of the mixture consists of components of unknown acute inhalation toxicity. Information required per Regulation (EU) 2020/1149 as regards diisocyanates: As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Dust clouds of this material in sufficient concentration in combination with an ignition source may be explosive. Dust deposits should not be allowed to accumulate on surfaces because of the potential for secondary explosions. Persons previously sensitised to isocyanates may develop a cross-sensitisation reaction to other isocyanates.
