Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
<1
EC/CAS
215-609-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
2119384822-32 <5
EC/CAS
926-141-6/1333-86-4
Name of the chemical
carbon black
Concentration
<5 2119456620-43 <0.5
EC/CAS
215-168-2/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
2119457614-35 <5 2119489379-17
EC/CAS
202-966-0
Name of the chemical
4,4'-Methylendiphenyldiisocyanat 2,2'-Methylendiphenyldiisocyanat 2,4'-Methylendiphenyldiisocyanat Methylendiphenyldiisocyanat (790/2009)
Concentration
2119457014-47
General Information
Revision date
2021-12-10
Product name
3M Polyurethane Sealant 540 (Various Colours)
Emergency telephone
+44 (0)1344 858 000
Icons in SDS
Company Information
company name
3m company
e-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H334
Hazard statements
Code
Statements
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The carcinogenicity classification for titanium dioxide is not applicable based on physical form (material is not a powder). This material has been tested for eye damage/irritation and the test results do not meet the criteria for classification. Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Hazard pictograms
GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt Reaction mass of Bis(1,2,2,6,6-pentamethyl-4- 915-687-0 < 0.5 piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl- 4-piperidyl sebacate 4,4'-methylenediphenyl diisocyanate 101-68-8 202-966-0 < 1
Hazard statements
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Prevention
P261A Avoid breathing vapours.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician.
Supplemental label elements
EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. 31% of the mixture consists of components of unknown acute oral toxicity. Information required per Regulation (EU) 2020/1149 as regards diisocyanates: As from 24 August 2023 adequate training is required before industrial or professional use. Further information can be found at feica.eu/Puinfo
2.3 Other hazards
Persons previously sensitised to isocyanates may develop a cross-sensitisation reaction to other isocyanates.
