Note: Ingredients listed on restricted chemical lists
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
5 - 10
EC/CAS
9046-10-0
Name of the chemical
Poly(propyleneglycol)diamine
Concentration
3 - 7
EC/CAS
15245-12-2
Name of the chemical
Nitric acid, ammonium calcium salt
Concentration
1 - 5
EC/CAS
140-31-8
Name of the chemical
2-piperazin-1-ylethylamine
Concentration
0.1 - 1
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
<0.4
General Information
Version
15.00
Revision date
2026-07-30
Product name
3M Panel Bonding Adhesive - Part A, PN 08116 (Meets GM 6449G and Daimler Chrysler MS-COD 507)
supplier name
3M
Manufacturer Name
3M
Emergency telephone
1-800-364-3577, (651) 737-6501
Icons in SDS
Company Information
company name
3M
Hazard Codes
Hazard statements (CLP)
H314, H317, H335, H336, H360, H370
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage.
H317
May cause an allergic skin reaction
H335
May cause respiratory irritation
H336
May cause drowsiness or dizziness
H360
May damage fertility or the unborn child
H370
Causes damage to organs
Section 2
SECTION 2: Hazards identification
Hazard pictograms
Corrosion |Exclamation mark |Health Hazard |
Hazard statements
Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May damage fertility or the unborn child. May cause drowsiness or dizziness. May cause respiratory irritation. Causes damage to organs: blood or blood-forming organs.
Precautionary statements
General: Keep out of reach of children.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe vapors or dust. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, face protection, and if needed, respiratory protection (see SDS Section 8).
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTER or doctor. Specific treatment (see Notes to Physician on this label). If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with methylene blue should be consider as part of the medical management
2.3 Other hazards
May cause chemical gastrointestinal burns.
Additional information
Persons previously sensitized to amines may develop a cross-sensitization reaction to certain other amines. 1% of the mixture consists of ingredients of unknown acute dermal toxicity.
2.1 Classification of the substance or mixture
Acute Toxicity (oral): Category 4. Acute Toxicity (dermal): Category 4. Acute Toxicity (inhalation): Category 4. Skin Corrosion/Irritation: Category 1B. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1. Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (single exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3. 2.2. Label elements Signal word Danger Symbols Corrosion |Exclamation mark |Health Hazard | Pictograms Hazard Statements Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May damage fertility or the unborn child. May cause drowsiness or dizziness. May cause respiratory irritation. Causes damage to organs: blood or blood-forming organs. Precautionary statements General: Keep out of reach of children. Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe vapors or dust. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, face protection, and if needed, respiratory protection (see SDS Section 8). Response: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Immediately call a POISON CENTER or doctor. Specific treatment (see Notes to Physician on this label). If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Disposal: Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. Notes to Physician: Overexposure to this product may result in methemoglobinemia. Methemoglobinemia may be clinically suspected by the presence of clinical "cyanosis" in the presence of a normal PaO2 (as obtained by arterial blood gases). Routine pulse oximetry may be inaccurate for monitoring oxygen saturation in the presence of methemoglobinemia, and should not be used to make the diagnosis of this disorder. If the patient is symptomatic or if the methemoglobin level is >20%, specific therapy with