3M Marine Adhesive / Sealant Fast Cure 4200 White; PN 05260, PN 06560

3m company

Revision date : 2012-10-05

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

N/A

Listed in

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

N/A

Listed in

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

EC/CAS

91082-17-6

Name of the chemical

alkyl(C10-C21)sulphonic acid, esters with phenol

Concentration

N/A

General Information

Revision date

2012-10-05

Product name

3M Marine Adhesive / Sealant Fast Cure 4200 White; PN 05260, PN 06560

CAS No.

91082-17-6

1.2.1 Relevant identified uses

Specific Use

Manufacturer Name

3M Marine Adhesive / Sealant Fast Cure 4200 White; PN 05260, PN 06560

Emergency telephone

1-800-364-3577 or (651) 737-6501 (24 hours

Icons in SDS

Company Information

company name

3m company

Section 2

SECTION 2: Hazards identification

OSHA 3.1 EMERGENCY OVERVIEW Specific Physical Form: Paste Odor, Color, Grade: White thixotropic paste, slight odor. General Physical Form: Solid Immediate health, physical, and environmental hazards: May cause allergic skin reaction. May cause allergic respiratory reaction. Contains a chemical or chemicals which can cause cancer. May cause target organ effects. Contains a chemical or chemicals which can cause birth defects or other reproductive harm.

Potential health effects

Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. Prolonged or repeated exposure may cause: Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of sputum, and changes in lung function tests. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears. Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. Prolonged or repeated exposure may cause: Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice. Neurological Effects: Signs/symptoms may include personality changes, lack of coordination, sensory loss, tingling or numbness of the extremities, weakness, tremors, and/or changes in blood pressure and heart rate. Kidney/Bladder Effects: Signs/symptoms may include changes in urine production, abdominal or lower back pain, increased protein in urine, increased blood urea nitrogen (BUN), blood in urine, and painful urination. Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient C.A.S. No. Class Description Regulation Ethylbenzene 100-41-4 Grp. 2B: Possible human carc. International Agency for Research on Cancer Poly(vinyl Chloride) 9002-86-2 Cancer hazard OSHA Carcinogens Titanium Dioxide 13463-67-7 Grp. 2B: Possible human carc. International Agency for Research on Cancer SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. If signs/symptoms develop, get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature >=750 ºF Flash Point [Details: Not a flammable solid per testing.] Flammable Limits(LEL) Not Applicable Flammable Limits(UEL) Not Applicable 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. Avoid contact with water. 6.2. Environmental precautions Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Clean-up methods Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more information on handling and managing the spill. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Avoid eye contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid skin contact. Avoid breathing of vapors. Avoid breathing of dust created by cutting, sanding, grinding or machining. For industrial or professional use only. Do not ingest. Keep out of the reach of children. The application of heat may generate levels of P,P'- METHYLENEBIS(PHENYL ISOCYANTE) in excess of the TLV.

Storage

Store away from acids. Store away from heat. Store out of direct sunlight. Keep container tightly closed. Store away from areas where product may come into contact with food or pharmaceuticals. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Use in an enclosed process area is recommended. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Do not use in a confined area or areas with little or no air movement. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne particles. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. The following eye protection(s) are recommended: Safety Glasses with side shields Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber Polyvinyl Alcohol (PVA) . 8.2.3 Respiratory Protection Avoid breathing of vapors. Avoid breathing of dust created by cutting, sanding, grinding or machining. An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 EXPOSURE GUIDELINES Ingredient Authority Type Limit Additional Information 3-(Trimethoxysilyl)propyl Glycidyl Ether CMRG TWA 5 ppm Calcium Oxide ACGIH TWA 2 mg/m3 Calcium Oxide OSHA TWA 5 mg/m3 Ethylbenzene ACGIH TWA 20 ppm Ethylbenzene CMRG TWA 25 ppm Ethylbenzene CMRG STEL 75 ppm Ethylbenzene OSHA TWA 435 mg/m3 FREE ISOCYANATES Manufacturer TWA 0.005 ppm determined FREE ISOCYANATES Manufacturer STEL 0.02 ppm determined 2,6-di-tert-butyl-4- CMRG TWA 10 mg/m3 (octadecanoxycarbonylethyl)phenol Hydrotreated Light Petroleum Distillates CMRG TWA 300 ppm p,p'-Methylenebis((Phenyl Isocyanate) ACGIH TWA 0.005 ppm p,p'-Methylenebis((Phenyl Isocyanate) OSHA CEIL 0.2 mg/m3 PETROLEUM DISTILLATES OSHA TWA 2000 mg/m3 Poly(vinyl Chloride) ACGIH TWA, respirable 1 mg/m3 fraction Poly(vinyl Chloride) OSHA TWA, as vinyl 1 ppm Skin Notation*; 29 CFR 1910.1017 chloride monomer Poly(vinyl Chloride) OSHA STEL, as vinyl 5 ppm Skin Notation*; 29 CFR 1910.1017 chloride monomer Titanium Dioxide ACGIH TWA 10 mg/m3 Titanium Dioxide CMRG TWA, as respirable 5 mg/m3 dust Titanium Dioxide OSHA TWA, as total dust 15 mg/m3 Xylene ACGIH TWA 100 ppm Xylene ACGIH STEL 150 ppm Xylene CMRG TWA 50 ppm Xylene CMRG STEL 75 ppm Xylene OSHA TWA 435 mg/m3 * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption. SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Paste Odor, Color, Grade: White thixotropic paste, slight odor. General Physical Form: Solid Autoignition temperature >=750 ºF Flash Point [Details: Not a flammable solid per testing.] Flammable Limits(LEL) Not Applicable Flammable Limits(UEL) Not Applicable Boiling Point Not Applicable Density 1.18 g/ml Vapor Density No Data Available Vapor Pressure No Data Available Specific Gravity 1.18 [Details: Water = 1] pH Not Applicable Melting point No Data Available Solubility in Water Nil Evaporation rate Not Applicable Hazardous Air Pollutants 5 - 9 % weight [Test Method: Calculated] Volatile Organic Compounds 32 g/l [Test Method tested per EPA method 24] [Details EU VOC content] Kow - Oct/Water partition coef No Data Available Percent volatile < 8 % weight VOC Less H2O & Exempt Solvents 32 g/l [Test Method: tested per EPA method 24] Viscosity No Data Available SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: 10.1 Conditions to avoid None known 10.2 Materials to avoid Water Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.