General Information
Revision date
2012-01-30
Product name
3M MarGrip II P.N. 05868, 05870, 05871, 31100
CAS No.
26123-45-5
Manufacturer Name
3M MarGrip II P.N. 05868
Icons in SDS
Company Information
company name
3m company
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) 3.1 EMERGENCY OVERVIEW Odor, Color, Grade: Tan paste with pungent odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause allergic skin reaction. Contains a chemical or chemicals which can cause cancer. May cause target organ effects.
Potential health effects
Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Inhalation: Intentional concentration and inhalation may be harmful or fatal. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Prolonged or repeated exposure may cause: Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of sputum, and changes in lung function tests. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears. Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice. Prolonged or repeated exposure may cause: Immunological Effects: Signs/symptoms may include alterations in the number of circulating immune cells, allergic skin and /or respiratory reaction, and changes in immune function. Neurological Effects: Signs/symptoms may include personality changes, lack of coordination, sensory loss, tingling or numbness of the extremities, weakness, tremors, and/or changes in blood pressure and heart rate. Ocular Effects: Signs/symptoms may include blurred or significantly impaired vision. Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient C.A.S. No. Class Description Regulation QUARTZ SILICA 14808-60-7 Grp. 1: Carcinogenic to International Agency for Research on Cancer humans SILICA, CRYSTALLINE (AIRBORNE SEQ677 Grp. 1: Carcinogenic to International Agency for Research on Cancer PARTICLES OF RESPIRABLE SIZE) humans SILICA, CRYSTALLINE (AIRBORNE SEQ677 Known human carcinogen National Toxicology Program Carcinogens PARTICLES OF RESPIRABLE SIZE) STYRENE MONOMER 100-42-5 Grp. 2B: Possible human carc. International Agency for Research on Cancer STYRENE MONOMER 100-42-5 Anticipated human carcinogen National Toxicology Program Carcinogens TITANIUM DIOXIDE 13463-67-7 Grp. 2B: Possible human carc. International Agency for Research on Cancer SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature No Data Available Flash Point 88 ºF [Test Method: Pensky-Martens Closed Cup] Flammable Limits(LEL) 0.9 % Flammable Limits(UEL) 6.8 % OSHA Flammability Classification: Class IC Flammable Liquid 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Remove all ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. 6.2. Environmental precautions For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Collect the resulting residue containing solution. Place in a metal container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Clean-up methods Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Contain spill. Cover spill area with a fire-extinguishing foam. An aqueous film forming foam (AFFF) is recommended. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible using non-sparking tools. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow
Precautionary statements
on the solvent label and MSDS. Seal the container In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. Ground containers securely when transferring contents. Wear low static or properly grounded shoes. Avoid breathing of vapors, mists or spray. Avoid skin contact. Avoid static discharge. Avoid eye contact with vapors, mists, or spray. Keep out of the reach of children. Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not breathe vapors. Do not breathe dust. Avoid contact with oxidizing agents.
Storage
Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Keep container tightly closed. Store away from areas where product may come into contact with food or pharmaceuticals. Store away from oxidizing agents. Store in a cool, dry place. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Use in an enclosed process area is recommended. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Do not use in a confined area or areas with little or no air movement. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Safety Glasses with side shields Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber . The following protective clothing material(s) are recommended: Boots - Neoprene Apron - polymer laminate . 8.2.3 Respiratory Protection Avoid breathing of vapors, mists or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not breathe vapors. Do not breathe dust. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges and P95 particulate prefilters . Select and use respiratory protection to prevent an inhalation exposure based on the results of an exposure assessment. Consult with your respirator manufacturer for selection of appropriate types of respirators. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Wash hands after handling and before eating. 8.3 EXPOSURE GUIDELINES Ingredient Authority Type Limit
Additional information
MAGNESIUM CARBONATE OSHA TWA, respirable 5 mg/m3 fraction MAGNESIUM CARBONATE OSHA TWA, as total dust 15 mg/m3 OXIDE GLASS CHEMICALS Manufacturer TWA, as dust 10 mg/m3 determined QUARTZ SILICA ACGIH TWA, respirable 0.025 mg/m3 fraction QUARTZ SILICA OSHA TWA concentration, 0.1 mg/m3 respirable QUARTZ SILICA OSHA TWA concentration, 0.3 mg/m3 as total dust STYRENE MONOMER ACGIH TWA 20 ppm STYRENE MONOMER ACGIH STEL 40 ppm STYRENE MONOMER OSHA TWA 100 ppm STYRENE MONOMER OSHA CEIL 200 ppm TALC ACGIH TWA, respirable 2 mg/m3 fraction TALC CMRG TWA, as respirable 0.5 mg/m3 dust TALC OSHA TWA concentration, 0.1 mg/m3 respirable TALC OSHA TWA concentration, 0.3 mg/m3 as total dust TALC OSHA TWA 20 millions of particles/cu. ft. TITANIUM DIOXIDE ACGIH TWA 10 mg/m3 TITANIUM DIOXIDE CMRG TWA, as respirable 5 mg/m3 dust TITANIUM DIOXIDE OSHA TWA, as total dust 15 mg/m3 TRIMETHYLOLPROPANE TRIACRYLATE AIHA TWA 1 mg/m3 Skin Notation* * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption. SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odor, Color, Grade: Tan paste with pungent odor General Physical Form: Liquid Autoignition temperature No Data Available Flash Point 88 ºF [Test Method: Pensky-Martens Closed Cup] Flammable Limits(LEL) 0.9 % Flammable Limits(UEL) 6.8 % Boiling Point 293 ºF Density 0.96 g/ml Vapor Density 3.600 [Ref Std: AIR=1] Vapor Pressure 4.5 mmHg Specific Gravity 0.96 [Ref Std: WATER=1] pH No Data Available Melting point No Data Available Solubility in Water Negligible Evaporation rate No Data Available Hazardous Air Pollutants 20.892 % weight [Test Method: Calculated] Volatile Organic Compounds 208 g/l [Test Method: calculated SCAQMD rule 443.1] Volatile Organic Compounds 21.7 % weight [Test Method: calculated per CARB title 2] Kow - Oct/Water partition coef No Data Available Percent volatile 22.03 % weight Percent volatile 23.29 % volume VOC Less H2O & Exempt Solvents 209 g/l [Test Method: calculated SCAQMD rule 443.1] Viscosity 100000 centipoise - 160000 centipoise SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Stable under normal conditions. May become unstable at elevated temperatures and/or pressure. Materials and Conditions to Avoid: 10.1 Conditions to avoid Sparks and/or flames Heat 10.2 Materials to avoid Strong oxidizing agents Strong acids Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Hydrocarbons During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion
TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D001 (Ignitable) Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): LB-K100-0748-1, LB-K100-0748-2, LB-K100-0748-3, LB-K100-0913-3, 60-4550-5098-3, 60-4550-5099-1, 60-4550-5266-6, 60- 4550-5267-4 For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt STYRENE MONOMER 100-42-5 10 - 30 STATE REGULATIONS Contact 3M for more information. CALIFORNIA PROPOSITION 65 Ingredient C.A.S. No.
2.1 Classification of the substance or mixture
SILICA, CRYSTALLINE (AIRBORNE SEQ677 **Carcinogen PARTICLES OF RESPIRABLE SIZE) ** WARNING: contains a chemical which can cause cancer. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. The components of this product are listed on the Canadian Domestic Substances List. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Further information
NFPA Hazard Classification Health 2 Flammability 3 Reactivity 0 Special None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 1: Product use information was modified. Section 16: Disclaimer (second paragraph) was modified. Section 4: First aid for eye contact - decontamination - was modified. Section 4: First aid for eye contact - medical assistance - was modified. Section 3: Immediate skin hazard(s) was modified. Section 3: Potential effects from eye contact was modified. Section 3: Potential effects from skin contact information was modified. Section 7: Handling information was modified. Section 7: Storage information was modified. Section 8: Engineering controls information was modified. Section 8: Respiratory protection information was modified. Section 10: Hazardous decomposition or by-products table was modified. Section 8: Skin protection - protective clothing information was modified. Section 3: Immediate other hazard(s) was modified. Section 3: Other health effects information was modified. Section 15: Inventories information was modified. Section 9: Density information was modified. Section 9: Vapor density value was modified. Section 9: Vapor pressure value was modified. Section 9: Boiling point information was modified. Section 5: Flammable limits (UE) information was modified. Section 5: Flammable limits (LEL) information was modified. Section 5: Autoignition temperature information was modified. Section 5: Flash point information was modified. Section 9: Property description for optional properties was modified. Section 9: Specific gravity information was modified. Section 9: pH information was modified. Section 9: Melting point information was modified. Section 9: Solubility in water text was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 9: Flash point information was modified.