3M High Performance Industrial Plastic Adhesive 4693

Hazard statements (CLP)

H225, H315, H336, H400, H410

Code

Statements

H225

Highly Flammable liquid and vapour

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The aspiration hazard classification is not required due to the product's viscosity. Flammable Liquid, Category 2 - Flam. Liq. 2; H225 Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Specific Target Organ Toxicity-Single Exposure, Category 3 - STOT SE 3; H336 Hazardous to the Aquatic Environment (Acute), Category 1 - Aquatic Acute 1; H400 Hazardous to the Aquatic Environment (Chronic), Category 1 - Aquatic Chronic 1; H410 For full text of H phrases, see Section 16.

2.2 Label elements

CLP REGULATION (EC) No 1272/2008

Hazard pictograms

GHS02 (Flame) |GHS07 (Exclamation mark) |GHS09 (Environment) | Ingredients: Ingredient CAS Nbr EC No. % by Wt cyclohexane 110-82-7 203-806-2 60 - 80

Hazard statements

H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H410 Very toxic to aquatic life with long lasting effects.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261E Avoid breathing vapour or spray. P273 Avoid release to the environment.

Response

P370 + P378 In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. P391 Collect spillage.

2.3 Other hazards

None known.