3M Hi-Strength 94 ET Cylinder Spray Adhesive, Clear

Hazard statements (CLP)

H320, H335, H336

Code

Statements

H320

Causes eye irritation

H335

May cause respiratory irritation

H336

May cause drowsiness or dizziness

SECTION 2: Hazards identification

Hazard classification Chemicals Under Pressure: Category 1 Serious Eye Damage/Irritation: Category 2B Specific Target Organ Toxicity (single exposure): Category 3

Hazard pictograms

Flame | Gas cylinder | Exclamation mark |

Hazard statements

Extremely flammable chemical under pressure: May explode if heated. Causes eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness.

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash thoroughly after handling.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In case of fire: Use a carbon dioxide extinguisher to extinguish. Stop leak if safe to do so. In case of leakage, eliminate all ignition sources.

Storage

Protect from sunlight. Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with applicable local/regional/national/international regulations.

2.3 Other hazards

Repeated exposure may cause skin dryness or cracking.

2.1 Classification of the substance or mixture

Chemicals Under Pressure: Category 1 Serious Eye Damage/Irritation: Category 2B. Specific Target Organ Toxicity (single exposure): Category 3.