3M Heavy Duty Bowl Cleaner Ready-to-Use

3M

Revision date : 2018-05-22

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 3
Safety risk rating 5
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

7732-18-5

Name of the chemical

Water, distilled, conductivity or of similar purity H2O

Concentration

60 - 90

EC/CAS

7647-01-0

Name of the chemical

Hydrochloric acid

Concentration

10 - 30

EC/CAS

68424-85-1

Name of the chemical

Alkyl (C12-16) dimethylbenzyl ammonium chloride

Concentration

< 0.1

General Information

Version

4.00

Revision date

2018-05-22

Product name

3M Heavy Duty Bowl Cleaner Ready-to-Use

1.2.1 Relevant identified uses

An HCL acid product formulated to help remove the most difficult rust stains and hard water mineral deposits from toilet bowls and urinals., Hard Surface Cleaner

supplier name

3M

Manufacturer Name

3M

Emergency telephone

1-800-364-3577, (651) 737-6501

Icons in SDS

GHS05 GHS07

Company Information

company name

3M

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H290, H302, H314, H332, H335

Hazard statements

Code

Statements

H290

May be corrosive to metals

Section 2

SECTION 2: Hazards identification

Hazard classification Corrosive to metal: Category 1 Acute Toxicity (oral): Category 4 Acute Toxicity (inhalation): Category 4 Serious Eye Damage/Irritation: Category 1 Skin Corrosion/Irritation: Category 1B Specific Target Organ Toxicity (single exposure): Category 3

Signal word

Danger

Hazard pictograms

Corrosion | Exclamation mark |

Hazard statements

May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage. Harmful if inhaled. May cause respiratory irritation.

Prevention

Keep only in original container. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Absorb spillage to prevent material damage.

Storage

Store in a corrosive resistant container with a resistant inner liner. Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 1% of the mixture consists of ingredients of unknown acute inhalation toxicity.

2.1 Classification of the substance or mixture

Corrosive to metal: Category 1. Acute Toxicity (oral): Category 4. Acute Toxicity (inhalation): Category 4. Serious Eye Damage/Irritation: Category 1. Skin Corrosion/Irritation: Category 1B. Specific Target Organ Toxicity (single exposure): Category 3.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.