Note: Ingredients listed on restricted chemical lists
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
N/A
EC/CAS
2530-85-0
Name of the chemical
[3-(methacryloxy)propyl]trimethoxysilane
Concentration
N/A
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
N/A
EC/CAS
72869-86-4
Name of the chemical
11,14-Dioxa-2,9-diazaheptadec-16-enoic Acid, 4,4,6,16-tetramethyl-10,15-dioxo, 2-[(2-methyl-1-oxo-2-propenyl)oxy]ethyl ester (31)
Concentration
N/A
EC/CAS
212-782-2
Name of the chemical
2-Hydroxyethyl Methacrylate (30)
Concentration
N/A
EC/CAS
276-957-5
Name of the chemical
11,14-Dioxa-2,9-diazaheptadec-16-enoic Acid, 4,4,6,16-tetramethyl-10,15-dioxo, 2-[(2-methyl-1-oxo-2-propenyl)oxy]ethyl ester (31)
Concentration
N/A
General Information
Revision date
2017-06-02
Product name
3M ESPE ADPER SCOTCHBOND 1 XT
Icons in SDS
Company Information
company name
3m company
e-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H319
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 This product is a medical device as defined in Directive 93/42/EEC (MDD), which is invasive or used in direct physical contact with the human body, and therefore is exempt from the requirements of classification and labelling according to Regulation (EC) No. 1272/2008 (CLP; Article 1, paragraph 5). Although not required, the classification and label information, as applicable, is provided below. Flammable Liquid, Category 2 - Flam. Liq. 2; H225 Serious Eye Damage/Eye Irritation, Category 2 - Eye Irrit. 2; H319 Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Skin Sensitization, Category 1B - Skin Sens. 1B; H317 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Hazard pictograms
GHS02 (Flame) |GHS07 (Exclamation mark) | Ingredients: Ingredient CAS Nbr % by Wt (1-methylethylidene)bis[4,1-phenyleneoxy(2-hydroxy-3,1-propanediyl)] 1565-94-2 10 - 20 bismethacrylate 2-Hydroxyethyl methacrylate 868-77-9 5 - 15 2-Hydroxy-1,3-propanediyl bismethacrylate 1830-78-0 5 - 10 7,7,9(or 7,9,9)-Trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16- 72869-86-4 1 - 5 diyl bismethacrylate
Hazard statements
H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H315 Causes skin irritation. H317 May cause an allergic skin reaction.
Prevention
P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280E Wear protective gloves.
Response
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P370 + P378G In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.
2.3 Other hazards
For information on hazards and safe use, please consider the corresponding sections of this document.
