3M Bondo Easy Finish Epoxy Bumper Repair, 806, 806C Part A

3m company

Revision date : 2012-12-12

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

N/A

Listed in

General Information

Revision date

2012-12-12

Product name

3M Bondo Easy Finish Epoxy Bumper Repair, 806, 806C Part A

Product Synonyms

OCTADECENOIC ACID

CAS No.

25068-38-6

Manufacturer Name

3M Bondo Easy Finish Epoxy Bumper Repair

Emergency telephone

1-800-364-3577 or (651) 737-6501 (24 hours

Icons in SDS

Company Information

company name

3m company

Section 2

SECTION 2: Hazards identification

29 CFR 1910.1200) 3.1 EMERGENCY OVERVIEW Specific Physical Form: Paste Odor, Color, Grade: Organic odor. General Physical Form: Liquid Immediate health, physical, and environmental hazards: Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause allergic skin reaction. Contains a chemical or chemicals which can cause cancer. Contains a chemical or chemicals which can cause birth defects or other reproductive harm.

Potential health effects

Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient C.A.S. No. Class Description Regulation CARBON BLACK 1333-86-4 Grp. 2B: Possible human carc. International Agency for Research on Cancer EPICHLOROHYDRIN 106-89-8 Grp. 2A: Probable human International Agency for Research on Cancer carc. EPICHLOROHYDRIN 106-89-8 Anticipated human carcinogen National Toxicology Program Carcinogens ETHYLBENZENE 100-41-4 Grp. 2B: Possible human carc. International Agency for Research on Cancer SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature No Data Available Flash Point 300 ºF [Test Method: Closed Cup] Flammable Limits(LEL) 1.1 % Flammable Limits(UEL) No Data Available 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: Not applicable. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. 6.2. Environmental precautions Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Clean-up methods Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more information on handling and managing the spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow

Precautionary statements

on the solvent label and MSDS In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Avoid eye contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Ground containers securely when transferring contents. Wear low static or properly grounded shoes. Avoid skin contact. Avoid breathing of vapors. Do not ingest. Avoid static discharge. Keep out of the reach of children. Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid contact with oxidizing agents. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment.

Storage

Store away from acids. Store away from heat. Store out of direct sunlight. Keep container tightly closed. Do not store containers on their sides. Store away from areas where product may come into contact with food or pharmaceuticals. Store away from oxidizing agents. Store in a cool, dry place. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Use with appropriate local exhaust ventilation. Use in an enclosed process area is recommended. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. To minimize the risk of injury to face and eyes, always wear eye and face protection when working at sanding or grinding operations or when near such operations. The following eye protection(s) are recommended: Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Wear appropriate gloves to minimize risk of injury to skin from contact with dust or physical abrasion from grinding or sanding. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber Polyvinyl Alcohol (PVA) . 8.2.3 Respiratory Protection Avoid breathing of vapors. Avoid breathing of dust created by cutting, sanding, grinding or machining. An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Do not ingest. 8.3 EXPOSURE GUIDELINES Ingredient Authority Type Limit

Additional information

CARBON BLACK ACGIH TWA, inhalable 3 mg/m3 fraction CARBON BLACK CMRG TWA 0.5 mg/m3 CARBON BLACK OSHA TWA 3.5 mg/m3 EPICHLOROHYDRIN ACGIH TWA 0.5 ppm Skin Notation* EPICHLOROHYDRIN OSHA TWA 19 mg/m3 Skin Notation* ETHYLBENZENE ACGIH TWA 20 ppm ETHYLBENZENE CMRG TWA 25 ppm ETHYLBENZENE CMRG STEL 75 ppm ETHYLBENZENE OSHA TWA 435 mg/m3 MAGNESIUM CARBONATE OSHA TWA, respirable 5 mg/m3 fraction MAGNESIUM CARBONATE OSHA TWA, as total dust 15 mg/m3 MANGANESE COMPOUNDS OSHA CEIL, as Mn 5 mg/m3 NEPHELINE SYENITE CMRG TWA, respirable 5 mg/m3 SILICA, AMORPHOUS OSHA TWA concentration 0.8 mg/m3 SILICA, AMORPHOUS OSHA TWA 20 millions of particles/cu. ft. TALC ACGIH TWA, respirable 2 mg/m3 fraction TALC CMRG TWA, as respirable 0.5 mg/m3 dust TALC OSHA TWA concentration, 0.1 mg/m3 respirable TALC OSHA TWA concentration, 0.3 mg/m3 as total dust TALC OSHA TWA 20 millions of particles/cu. ft. TOLUENE ACGIH TWA 20 ppm TOLUENE CMRG STEL 75 ppm Skin Notation* TOLUENE OSHA TWA 200 ppm TOLUENE OSHA CEIL 300 ppm * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption. SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Paste Odor, Color, Grade: Organic odor. General Physical Form: Liquid Autoignition temperature No Data Available Flash Point 300 ºF [Test Method: Closed Cup] Flammable Limits(LEL) 1.1 % Flammable Limits(UEL) No Data Available Boiling Point No Data Available Density 1.44 g/ml Vapor Density No Data Available Vapor Pressure No Data Available Specific Gravity 1.44 [Ref Std: WATER=1] pH No Data Available Melting point No Data Available Solubility In Water No Data Available Hazardous Air Pollutants 0.51 % weight [Test Method: Calculated] Volatile Organic Compounds 18 g/l [Test Method: calculated SCAQMD rule 443.1] Volatile Organic Compounds 1.2 % weight [Test Method: calculated per CARB title 2] Kow - Oct/Water partition coef No Data Available Percent volatile 1.19 % weight VOC Less H2O & Exempt Solvents 18 g/l [Test Method: calculated SCAQMD rule 443.1] Viscosity 280000 - 375000 centipoise SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Stable at normal conditions. May become unstable at elevated temperatures and/or pressure. Materials and Conditions to Avoid: 10.1 Conditions to avoid Light Heat Sparks and/or flames 10.2 Materials to avoid Strong acids Strong oxidizing agents Alkali and alkaline earth metals Water Reducing agents Strong bases Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Aldehydes During Combustion Hydrocarbons During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Phosgene During Combustion

TOXICOLOGICAL INFORMATION

Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator in the presence of a combustible material. Combustion products will include HCl. Facility must be capable of handling halogenated materials. EPA Hazardous Waste Number (RCRA): Not regulated Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): LB-K100-0543-1, 41-0003-6677-7, 41-0003-7959-8, 41-3701-1513-5 For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes STATE REGULATIONS Contact 3M for more information. CALIFORNIA PROPOSITION 65 Ingredient C.A.S. No.

2.1 Classification of the substance or mixture

CARBON BLACK 1333-86-4 **Carcinogen EPICHLOROHYDRIN 106-89-8 *Male reproductive toxin EPICHLOROHYDRIN 106-89-8 **Carcinogen ETHYLBENZENE 100-41-4 **Carcinogen TOLUENE 108-88-3 *Female reproductive toxin TOLUENE 108-88-3 *Developmental Toxin * WARNING: contains a chemical or chemicals which can cause birth defects or other reproductive harm. ** WARNING: contains a chemical which can cause cancer. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Further information

NFPA Hazard Classification Health 2 Flammability 1 Reactivity 0 Special None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 1: Product name was modified. Section 1: Product use information was modified. Section 16: NFPA hazard classification for flammability was modified. Section 16: Disclaimer (second paragraph) was modified. Section 3: Immediate physical hazard(s) was modified. Section 3: Potential effects from skin contact information was modified. Section 3: Potential effects from inhalation information was modified. Section 5: Fire fighting procedures information was modified. Section 5: Unusual fire and explosion hazard information was modified. Section 7: Handling information was modified. Section 7: Storage information was modified. Section 8: Engineering controls information was modified. Section 8: Eye/face protection phrase was modified. Section 8: Respiratory protection information was modified. Section 8: Prevention of swallowing information was modified. Section 10: Hazardous decomposition or by-products table was modified. Section 13: Waste disposal method information was modified. Section 8: Skin protection - recommended gloves information was modified. Section 8: Respiratory protection - recommended respirators information was modified. Section 8: Respiratory protection - recommended respirators was modified. Section 10: Stability information was modified. Section 3: Immediate other hazard(s) was modified. Page Heading: Product name was modified. Section 15: 311/312 Fire Hazard score was modified. Section 15: Inventories information was modified. Section 9: Density information was modified. Section 9: Vapor density value was modified. Section 9: Vapor pressure value was modified. Section 9: Boiling point information was modified. Section 5: Flammable limits (UE) information was modified. Section 5: Flammable limits (LEL) information was modified. Section 5: Autoignition temperature information was modified. Section 5: Flash point information was modified. Section 9: Property description for optional properties was modified. Section 9: Specific gravity information was modified. Section 9: pH information was modified. Section 9: Melting point information was modified. Section 9: Solubility in water value was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 9: Flash point information was modified. Section 9: Flammable limits (LEL) information was modified. Section 9: Flammable limits (UEL) information was modified. Section 9: Autoignition temperature information was modified. Section 14: ID Number(s) Template 1 was modified. Section 2: Ingredient table was modified. Section 8: Exposure guidelines ingredient information was modified. Section 3: Carcinogenicity table was modified. Section 6: Personal precautions information was modified. Section 6: Methods for cleaning up information was modified. Section 10: Materials to avoid physical property was modified. Section 3: Immediate skin hazard(s) was added. Section 15: California proposition 65 reproductive harm warning was added. Section 3: Other health effects information (reproductive hazards) was added. Section 8: Exposure guideline note was added. Section 15: California proposition 65 ingredient information was added. Section 15: California proposition 65 heading was added. Section 15: California proposition 65 cancer warning was added. Section 16: Web address was added. Section 6: Environmental procedures information was added. Section 8: Hand protection information was added. Section 1: Address was added. Copyright was added. Company logo was added. Telephone header was added. Company Telephone was added. Section 1: Emergency phone information was added. Section 1: Emergency phone information was deleted. Company Logo was deleted. Section 5: OSHA flammability heading was deleted. Copyright was deleted. Section 5: OSHA flammability data was deleted. Section 3: Other health effects information was deleted. Section 9: Vapor density text was deleted. Section 9: Vapor pressure text was deleted. Section 1: Address line 1 was deleted. Section 1: Address line 2 was deleted. Section 8: Respiratory protection - recommended respirators punctuation was deleted. Section 15: EPCRA 313 information was deleted. Section 15: EPCRA 313 text was deleted. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M 3M USA MSDSs are available at www.3M.com SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3M™ Bondo(r) Easy Finish(r) Epoxy Bumper Repair, 806 MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center St. Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours) Issue date 11/11/09 Supercedes Date: 09/03/08 Document Group: 24-8510-0 Product Use: Intended Use: Automotive SECTION 2: INGREDIENTS Ingredient C.A.S. No. % by Wt MERCAPTAN POLYMER; NJ TS REG NO. 33611900-5145KP Trade Secret 30 - 60 ANHYDROUS POTASSIUM SODIUM ALUMINO SILICATE 37244-96-5 10 - 30 DIMER ACID, TRIETHYLENETETRAMINE, TALL OIL FATTY ACID 68082-29-1 5 - 10 POLYMER TRIS(2,4,6-DIMETHYLAMINOMONOMETHYL)PHENOL 90-72-2 3 - 7 SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE 112945-52-5 1 - 5 PHENOL, 4-NONYL-, BRANCHED 84852-15-3 1 - 5 TRIETHYLENETETRAMINE 112-24-3 0.5 - 1.5 SECTION 3: HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Specific Physical Form: Paste Odor, Color, Grade: Organic odor. General Physical Form: Liquid Immediate health, physical, and environmental hazards: Combustible liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause severe eye irritation. May cause allergic skin reaction. May cause severe skin irritation. 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Skin Contact: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Target Organ Effects: Persons previously sensitized to amines may develop a cross-sensitization reaction to certain other amines.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.