Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
30 - 60
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
10 - 30
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
5-10
EC/CAS
9004-70-0
Name of the chemical
Nitrocellulose
Concentration
3-7
General Information
Version
7.00
Revision date
2026-10-07
Product name
3M Acryl-Red Glazing Putty PN 05098
1.2.1 Relevant identified uses
Automotive
supplier name
3M
Manufacturer Name
3M
Emergency telephone
1-800-364-3577, (651) 737-6501
Icons in SDS
Company Information
company name
3M
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H319, H336, H351, H360, H372
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Hazard pictograms
Flame |Exclamation mark |Health Hazard |
Hazard statements
Highly flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of causing cancer. May damage fertility or the unborn child. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure: nervous system | respiratory system | sensory organs.
Precautionary statements
General: Keep out of reach of children.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Do not breathe vapors or dust. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, eye protection, face protection, and if needed, respiratory protection (see SDS Section 8).
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Call a POISON CENTER or doctor. Get medical attention if you feel unwell. If eye irritation persists or if skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.
Storage
Store in a well-ventilated place. Keep cool. Store locked up.
Disposal
Dispose of contents and container in accordance with applicable local, regional, national, and international regulations. 14% of the mixture consists of ingredients of unknown acute oral toxicity. 14% of the mixture consists of ingredients of unknown acute dermal toxicity. 7% of the mixture consists of ingredients of unknown acute inhalation toxicity.
2.1 Classification of the substance or mixture
Flammable Liquid: Category 2. Skin Corrosion/Irritation: Category 2. Serious Eye Damage/Irritation: Category 2A. Skin Sensitizer: Category 1. Carcinogenicity: Category 2. Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (repeated exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3.