Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
100%
General Information
Revision date
2019-12-01
Product name
Scotchcast Electrical insulating Resin 40 part B
CAS No.
9016-87-9
supplier name
3M Australia
Emergency telephone
1800 097 146 (Australia only
Icons in SDS
Company Information
company name
3M Australia
e-mail address of the competent person responsible for the Safety Data Sheet
productinfo.au@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H334, H335, H372
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
This product is classified as a hazardous chemical according to the Model Work Health and Safety Regulations, 2011, in accordance with applicable State and Territory legislation. Refer to Section 14 of this Safety Data Sheets for product Dangerous Goods Classification.
2.1 Classification of the substance or mixture
Serious Eye Damage/Irritation: Category 2. Skin Corrosion/Irritation: Category 2. Respiratory Sensitizer: Category 1. Skin Sensitizer: Category 1. Specific Target Organ Toxicity (single exposure): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1.
2.2 Label elements
The label elements below were prepared in accordance with the Code of Practice on Preparation of Safety Data Sheets for Hazardous Chemicals (Safe Work Australia, December 2011). This information may be different from the actual product label.
Hazard pictograms
Exclamation mark | Health Hazard |
Hazard statements
H319 Causes serious eye irritation. H315 Causes skin irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H372 Causes damage to organs through prolonged or repeated exposure: respiratory system |
Prevention
P260 Do not breathe dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P285 In case of inadequate ventilation wear respiratory protection. P280B Wear protective gloves and eye/face protection. P270 Do not eat, drink or smoke when using this product. P264 Wash thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace.
Response
P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P314 Get medical advice/attention if you feel unwell.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Other assigned/identified product hazards Persons previously sensitised to isocyanates may develop a cross-sensitisation reaction to other isocyanates.
Other hazards which do not result in classification
None known.