Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
3-10
EC/CAS
55120-75-7
Name of the chemical
Methanesulfonic acid, 1,1,1-trifluoro-, calcium salt (2:1)
Concentration
1-5
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
1-5
General Information
Version
1.00
Revision date
2023-04-12
Product name
3M Scotch-Weld EC-2615 B/A Epoxy Adhesive (Part A)
1.2.1 Relevant identified uses
PART A FOR 2-PART ADHESIVE
supplier name
3M Australia
Icons in SDS
Company Information
company name
3M Australia
e-mail address of the competent person responsible for the Safety Data Sheet
productinfo.au@mmm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H314, H317
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
This product is classified as a hazardous chemical according to the Model Work Health and Safety Regulations, 2011, in accordance with applicable State and Territory legislation. Refer to Section 14 of this Safety Data Sheets for product Dangerous Goods Classification. Classification of the substance or mixture Corrosive to metal: Category 1. Skin Corrosion/Irritation: Category 1. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1
2.2 Label elements
The label elements below were prepared in accordance with the Code of Practice on Preparation of Safety Data Sheets for Hazardous Chemicals (Safe Work Australia, December 2011). This information may be different from the actual product label.
Signal word
Danger
Hazard pictograms
Corrosion |Exclamation mark
Hazard statements
H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction.
Prevention
P234 Keep only in original packaging. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280D Wear protective gloves, protective clothing, and eye/face protection.
Response
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTRE or doctor/physician. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P390 Absorb spillage to prevent material damage.
Storage
P405 Store locked up. P406 Store in a corrosion-resistant container with a resistant inner liner.
Disposal
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Other assigned/identified product hazards - May cause chemical gastrointestinal burns.
Other hazards which do not result in classification
May be harmful if swallowed. May be harmful in contact with skin. Harmful to aquatic life with long lasting effects.
2.1 Classification of the substance or mixture
Corrosive to metal: Category 1. Skin Corrosion/Irritation: Category 1. Serious Eye Damage/Irritation: Category 1. Skin Sensitizer: Category 1.
