3M Ceramic Boost Spray, 39905

Hazard statements (CLP)

H225

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

This product is classified as a hazardous chemical according to the Model Work Health and Safety Regulations, 2011, in accordance with applicable State and Territory legislation. Refer to Section 14 of this Safety Data Sheets for product Dangerous Goods Classification. Classification of the substance or mixture Flammable Liquid: Category 2

2.2 Label elements

The label elements below were prepared in accordance with the Code of Practice on Preparation of Safety Data Sheets for Hazardous Chemicals (Safe Work Australia, December 2011). This information may be different from the actual product label.

Hazard pictograms

Flame |

Hazard statements

H225 Highly flammable liquid and vapour.

Precautionary statements

General: P102 Keep out of reach of children.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical, ventilating and lighting equipment. P242 Use non-sparking tools. P243 Take action to prevent static discharges.

Response

P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P370 + P378 In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Storage

P403 + P235 Store in a well-ventilated place. Keep cool.

Disposal

P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Other assigned/identified product hazards None known.

Other hazards which do not result in classification

Causes mild skin irritation. Very toxic to aquatic life with long lasting effects.

2.1 Classification of the substance or mixture

Flammable Liquid: Category 2.