General Information
Revision date
2010-02-12
Product name
3M(TM) Automix(TM) Panel Bonding Adhesive - Part A, PN 08116 (Meets GM 6449G and Daimler Chrysler MS-COD 507)
Product Synonyms
BUTADIENE ACRYLONITRILE POLYMER
CAS No.
68911-25-1
Manufacturer Name
3M
Emergency telephone
1-800-364-3577 or (651) 737-6501 (24 hours
Icons in SDS
Company Information
company name
3M
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) 3.1 EMERGENCY OVERVIEW Specific Physical Form: Viscous Odor, Color, Grade: Amber color; Slight amine odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: May cause chemical eye burns. May cause allergic skin reaction. May cause chemical skin burns. May cause chemical gastrointestinal burns. May cause target organ effects. Contains a chemical or chemicals which can cause birth defects or other reproductive harm.
Potential health effects
Eye Contact: Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision. Skin Contact: Corrosive (Skin Burns): Signs/symptoms may include localized redness, swelling, itching, intense pain, blistering, ulceration, and tissue destruction. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Corrosion: Signs/symptoms may include severe mouth, throat and abdominal pain; nausea; vomiting; and diarrhea; blood in the feces and/or vomitus may also be seen. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Persons previously sensitized to amines may develop a cross-sensitization reaction to certain other amines. Contains a chemical or chemicals which can cause birth defects or other reproductive harm. SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water for at least 15 minutes. Get immediate medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get immediate medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature No Data Available Flash Point >=230 ºF [Test Method: Closed Cup] Flammable Limits - LEL No Data Available Flammable Limits - UEL No Data Available
Storage
Store in a cool place. Store away from acids. Keep container in well-ventilated area. Store away from flammable and combustible materials. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Use with appropriate local exhaust ventilation. Provide appropriate local exhaust when product is heated. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Full Face Shield, Indirect Vented Goggles. 8.2.2 Skin Protection Avoid skin contact. Avoid skin contact with hot material. 8.2.3 Respiratory Protection Avoid breathing of vapors, mists or spray. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
Additional information
DIMETHYL SILOXANE, REACTION CMRG CEIL 5 mg/m3 PRODUCT WITH SILICA TOLUENE ACGIH TWA 20 ppm TOLUENE CMRG STEL 75 ppm Skin Notation* TOLUENE
TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: As a disposal alternative, dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D018 (Benzene) Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION LB-K100-0126-5 Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes STATE REGULATIONS Contact 3M for more information.
2.1 Classification of the substance or mixture
TOLUENE 108-88-3 *Developmental Toxin * WARNING: contains a chemical or chemicals which can cause birth defects or other reproductive harm. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information.
Further information
NFPA Hazard Classification Health 3 Flammability 1 Reactivity 0 Special None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 16: NFPA hazard classification for health was modified. Copyright was modified. Section 3: Immediate skin hazard(s) was modified. Section 3: Immediate eye hazard(s) was modified. Section 3: Potential effects from eye contact was modified. Section 3: Potential effects from skin contact information was modified. Section 3: Potential effects from ingestion information was modified. Section 8: Skin protection phrase was modified. Section 4: First aid for skin contact - decontamination - was modified. Section 4: First aid for skin contact - medical assistance - was modified. Section 4: First aid for ingestion (swallowing) - decontamination - was modified. Section 4: First aid for ingestion (swallowing) - medical assistance - was modified. Section 3: Immediate other hazard(s) was modified. Section 9: Property description for optional properties was modified. Section 2: Ingredient table was modified. Section 8: Exposure guidelines ingredient information was modified. Section 3: Immediate ingestion hazard(s) was added. Section 10.1 Conditions to avoid was added. Section 10.2 Materials to avoid was added. Section 6: Release measures information was added. Section 10: Materials to avoid physical property was added. Section 10: Conditions to avoid physical property was added. Section 6: Release measures information was deleted. Section 3: Carcinogenicity phrase was deleted. Section 10: Materials and conditions to avoid physical property was deleted. Section 15