3M Injector Cleaner, 08812

3M

Revision date : 2018-12-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS06 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

8052-41-3

Name of the chemical

Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy

Concentration

50 - 90

Listed in

EC/CAS

64741-86-2

Name of the chemical

Distillates (petroleum), sweetened middle

Concentration

< 3

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

< 2

Listed in

EC/CAS

91-20-3

Name of the chemical

Naphthalene,3

Concentration

< 0.5

General Information

Revision date

2018-12-06

Product name

3M Injector Cleaner, 08812

supplier name

3M

Manufacturer Name

3M

Emergency telephone

1-800-364-3577 or (651) 737-6501 (24 hours

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

3M

Section 2

SECTION 2: Hazards identification

29 CFR 1910.1200) The label elements below were prepared in accordance with

2.1 Classification of the substance or mixture

Flammable Liquid: Category 3. Acute Toxicity (inhalation): Category 4. Skin Corrosion/Irritation: Category 2.

Aspiration hazard

Category 1 Carcinogenicity: Category 2. Specific Target Organ Toxicity (single exposure): Category 3.

Hazard pictograms

Flame | Exclamation mark | Health Hazard |

Hazard statements

Flammable liquid and vapor. Causes skin irritation. Harmful if inhaled. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Suspected of causing cancer.

Precautionary statements

General: Keep out of reach of children.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Wash thoroughly after handling.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Do NOT induce vomiting. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Call a POISON CENTER or doctor/physician if you feel unwell. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Storage

Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 3% of the mixture consists of ingredients of unknown acute oral toxicity. 3% of the mixture consists of ingredients of unknown acute dermal toxicity. 33% of the mixture consists of ingredients of unknown acute inhalation toxicity.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.