3M Imperial Compound and Finishing Material, PN 06044, 06045, 06046

3M

Revision date : 2018-01-18

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS08
Health risk rating 5
Safety risk rating 4
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

8052-41-3

Name of the chemical

Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy

Concentration

15 - 40

Listed in

EC/CAS

7732-18-5

Name of the chemical

Water, distilled, conductivity or of similar purity H2O

Concentration

15 - 40

EC/CAS

1344-28-1

Name of the chemical

aluminium oxide

Concentration

10 - 30

EC/CAS

9005-65-6

Name of the chemical

polyethyleneglycol sorbitan monooleate

Concentration

3 - 7

General Information

Revision date

2018-01-18

Product name

3M Imperial Compound and Finishing Material, PN 06044, 06045, 06046

1.2.1 Relevant identified uses

Rubbing Compound, Marine

supplier name

3M

Manufacturer Name

3M

Emergency telephone

1-800-364-3577 or (651) 737-6501 (24 hours

Icons in SDS

GHS02 GHS07

Company Information

company name

3M

GHS Information

Signal word

Warning

Section 2

SECTION 2: Hazards identification

29 CFR 1910.1200) The label elements below were prepared in accordance with

2.1 Classification of the substance or mixture

Flammable Liquid: Category 3. Skin Corrosion/Irritation: Category 2. Specific Target Organ Toxicity (single exposure): Category 3.

Signal word

Warning

Hazard pictograms

Flame | Exclamation mark |

Hazard statements

Flammable liquid and vapor. Causes skin irritation. May cause drowsiness or dizziness.

Precautionary statements

General: Keep out of reach of children.

Prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Wash thoroughly after handling.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Call a POISON CENTER or doctor/physician if you feel unwell. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

Storage

Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 1% of the mixture consists of ingredients of unknown acute oral toxicity. 1% of the mixture consists of ingredients of unknown acute dermal toxicity. 36% of the mixture consists of ingredients of unknown acute inhalation toxicity.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.