Note: Ingredients listed on restricted chemical lists
EC/CAS
220-666-8/2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
50-100 43-52
EC/CAS
202-859-9/100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
10-25
General Information
Revision date
2014-07-11
Product name
StrengthMax / Z-Max 90 Hardener
1.2.1 Relevant identified uses
An infiltration hardener used to strengthen parts made with ZPrinter® 3D printers and ProJet® x60 3D printers
Emergency telephone
800.424.9300, +44 144-2282600, 703.527.3887
Icons in SDS
Company Information
company name
3D Systems, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H312, H314, H317, H412
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification GHS
Hazard statements
H312: Harmful in contact with skin H302: Harmful if swallowed H314: Causes severe skin burns and eye damage H317: May cause an allergic skin reaction H412: Harmful to aquatic life with long lasting effects
Hazardous Ingredients
3-aminomethyl-3,5,5-trimethylcyclohexylamine SDS • StrengthMax / Z-Max™ 90 Hardener • 22-83106-S12-01-A • ENGLISH • GHS 1
Precautionary statements
P401: Store in a well-ventilated place P280: Wear protective gloves/protective clothing/eye protection/face protection P302+352: IF ON SKIN: Wash with plenty of soap and water. P305+351+338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. P333+313: If skin irritation or rash occurs: Get medical advice/attention. P337+313: If eye irritation persists: Get medical advice/attention. Hazardous Materials Identification System
NFPA Ratings
(HMIS): 1 0 = Minimal (Degree of hazard: 0 = low, 1 = Slight 3 1 4 = extreme); 2 = Moderate Health 3 3 = Serious 4 = Severe Flammability 1
Physical hazards
1 Personal Protective Equipment B Skin, eye protection __________________________________________________________________________________________
2.1 Classification of the substance or mixture
GHS : Regulation (EC) No. 1272/2008, HazCom 2012: Skin corrosion/irritation Category 2 H312 Acute Toxicity Category 4 H302 Skin corrosion Category 1 H314 Skin sensitization Category 1 H317 Aquatic Chronic Category 4 H412 Regulation (EC) 67/548/EEC and 1999/45/EC: C, Xn R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed. R 34 Causes burns. R 43 may cause sensitization by skin contact. R 52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment