Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
88-91
General Information
Revision date
2017-02-07
Product name
1.2 Type: AlSi10Mg alloy
1.2.1 Relevant identified uses
For use with ProX® DMP 320 printers
1.2.2. Uses advised against
No data
Emergency telephone
800.424.9300, +1 703.527.3887, +(81)-345209637
Icons in SDS
Company Information
company name
3D Systems, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
moreinfo@3dsystems.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H228, H261, H334, H373
Hazard statements
Code
Statements
H228
Flammable solid
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification
Signal word
Warning Hazard determining components of labelling: Aluminium, Silicium, Magnesium SDS • LaserForm® AlSi10Mg Type A • 151810-S12-00-C • ENGLISH • GHS Hazard statements H228: Flammable solid H261: In contact with water releases flammable gas H334: May cause asthma symptoms or breathing difficulties if inhaled H373: May cause damage to organs through prolonged or repeated exposure
Precautionary statements
P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P223: Do not allow contact with water. P231+232: Handle under inert gas. Protect from moisture. P240: Ground/bond container and receiving equipment. P241: Use explosion-proof electrical and ventilating equipment. P260: Do not breathe dust. P280: Wear protective gloves, clothing and eye protection. P284: [In case of inadequate ventilation] wear respiratory protection. P304+340 IF INHALED Remove person to fresh air and keep comfortable for breathing P314: Get medical advice/attention if you feel unwell. P370+378 In case of fire Use dry sand or Class D fire extinguisher to extinguish P402+404: Store in a dry place. Store in a closed container. P422: Store contents under inert gas. Other dangers: Danger of dust explosion: Dust clouds can be ignited and could pose an explosion risk in a confined space. Reactivity: Can react with oxidizing agents and in alkaline solutions, causing hydrogen release. Hydrogen gas can ignite spontaneously due to exothermal nature of reaction – Explosion risk. Reactivity: Can react violently with halogenated hydrocarbons.
NFPA Ratings
Hazardous Materials Identification System (HMIS): (Degree of hazard: 0 = low, 4 = extreme); 2 Health 1 0 = Minimal Flammability 2 W 1 = Slight
Physical hazards
1 2 = Moderate 3 = Serious Personal Protection: 4 = Severe Skin, eye protection SDS • LaserForm® AlSi10Mg Type A • 151810-S12-00-C • ENGLISH • GHS 2
2.1 Classification of the substance or mixture
Substances which, in contact with water, emit flammable gases Category 3 H261 Regulation (EC) 67/548/EEC and 1999/45/EC: F, R11, R15 2.2 Label Elements Regulation (EC) No. 1272/2008
