Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0-2
General Information
Product name
TriVEX XX
1.2.1 Relevant identified uses
Extrusion and injection molding applications
Icons in SDS
Company Information
company name
3290 Claremont Ave
Section 2
SECTION 2: Hazards identification
OSHA EMERGENCY OVERVIEW: · Pellets with slight or no odor. · Spilled material may create slipping hazard. · Can burn in a fire creating dense toxic smoke. · Molten plastic can cause severe thermal burns. · Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. · Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard. · Warning! May form combustible dust concentrations in air (during processing)
HMIS® ratings
Health = 0; Flammability = 1; Reactivity = 0; PPE = B
Potential health effects
INGESTION: No hazard in normal industrial use. SKIN No absorption hazard in normal industrial use. ABSORPTION: EYE CONTACT: Can cause mechanical irritation if dusts are generated. SKIN CONTACT: Unlikely to cause irritation even on repeated contact. Molten material on skin can cause thermal burns. Immediately cool with plenty of water to harden material before removing. Avoid peeling from skin. CHRONIC / CARCINOGENICITY NTP: Not Tested.
