Примечание: Ингредиенты указаны в списке ограниченных химических веществ
EC №
215-691-6/1344-28-1
Название химического вещества
aluminium oxide
Концентрация
≥25-≤50
EC №
236-675-5/13463-67-7
Название химического вещества
Reaction mass of titanium dioxide and silver chloride
Концентрация
≥25-≤50
EC №
265-067-2/64741-65-7
Название химического вещества
Petroleum, coal, tar and natural gas and their derivatives generated using distillation and/or other processing methods if they contain ≥ 0,1 % w/w benzene
Концентрация
≥10-<20
Главная Информация
Version
3.48
Дата
2023-11-02
Описание продукта
Пигментная основа
Рекомендуемое применение
Промышленное применение
Телефон
+44 (0) 1449 771775
Значки в Паспорте безопасности
Информация о компании
Компания
PPG Industries (UK) Ltd
Адрес электронной почты
Product.Stewardship.EMEA@ppg.com
Информация СГС
Сигнальное слово
Нет сигнального слова
Hazard Codes
Заявления об опасности (CLP)
H372
Заявления об опасности
Код
Заявления
H372
Наносит вред органам в результате длительного или многократного воздействия
Раздел 2
раздел 2: идентификация опасности (опасностей)
Ингредиенты неизвестной токсичности
23.6% (oral), 50.8% (dermal), 46.5% (inhalation) This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8).
· Сигнальное слово
Danger
Формулировки опасностей
Flammable liquid and vapor. May cause an allergic skin reaction. May cause cancer. Suspected of damaging fertility or the unborn child.
Профилактика
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapor. Contaminated work clothing must not be allowed out of the workplace.
Ответ
IF exposed or concerned Get medical advice or attention. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation or rash occurs: Get medical advice or attention.
Хранение
Store locked up.
Утилизация
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Дополнительная информация об опасностях (ЕС)
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
2.3 Другие опасности
Prolonged or repeated contact may dry skin and cause irritation.
2.1. Классификация вещества или смеси
SKIN SENSITIZATION - Category 1 CARCINOGENICITY - Category 1B TOXIC TO REPRODUCTION - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 23.6% (oral), 50.8% (dermal), 46.5% (inhalation) This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8).